Worcestershire · England

Bath re-enamelling & resurfacing in Crabbs Cross, Worcestershire

Bath re-enamelling in Crabbs Cross without the cost of replacing. Get a fixed price from your photos, then book a visit.

  • Resurfacing from £350
  • Enamel that’s lost its shine and feels rough
  • An original cast iron bath that needs restoring
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Crabbs Cross

Bath re-enamelling at your home in Crabbs Cross

Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We’re frequently asked to fix enamel that’s lost its shine and feels rough and an old resurfacing that’s failing, across pressed steel baths, cast iron baths and basins & shower trays.

Big or small, it’s backed by a one-year guarantee.

Surface Doctor technician refinishing the outside of a roll-top bath
Area
Crabbs Cross (B97, B98)
Area hub
Worcestershire
Guarantee
One year on every repair
Quotes
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026

Repairing versus replacing in Crabbs Cross

For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.

What you get with us

  • Colour mixed on the day to match
  • Rooms protected and left tidy
  • CHAS, Constructionline and SafeContractor accredited
  • Same prices wherever you are

See our full price list and guide to resurfacing and replacement costs.

What your bath is made of matters

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

FAQs for Crabbs Cross

What does bath re-enamelling cost?

Resurfacing from £350. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

Do I need to be at home?

Someone needs to let us in and show us the job. You do not need to watch us work.

Someone resurfaced my bath and it’s peeling. Can you help?

In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.

How durable is a resurfaced bath?

That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.

Can you make a coloured bath white?

Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.

How quickly can you book me in?

That depends on our diary for your area. We will offer you dates when we send your quote.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

What information do you need?

A close-up, a wider photo and your postcode. After that, we just agree a date.

What we can’t put right

A repair is not right for every job, including:

  • Damage hidden under a previous coating, until it’s stripped back
  • Leaking taps or wastes (a plumber’s job)
  • A cast iron or steel bath that’s cracked right through

Send us photos and we will tell you honestly.

Materials we repair

  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths

DIY repairs versus a professional job

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

How the visit works

Arrival times are agreed in advance, so you’re not left guessing. Once we are there, the work takes most of the day for most jobs. We leave the room clean and ready to use once it has cured.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

How to prepare

  • Tell us about any previous repairs or coatings
  • Tell us if there are stairs or a lift
  • Clear the area around the damage

Get a quote

If you’re in Crabbs Cross and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Read more

Landlord and trade work in Crabbs Cross

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Where we work around Crabbs Cross

Crabbs Cross is about 1 mile south of Redditch, in Worcestershire. From the centre of Crabbs Cross to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 376 towns and villages in Worcestershire, from the larger towns to small villages. We work right across the region, from Crabbs Cross to Birmingham (13 miles away).

Here we cover the B97 and B98 postcode area. From Patch Lane, Yvonne Road and Clent Avenue or anywhere nearby, a technician can come to you. If you’re just outside Crabbs Cross, we cover Hunt End (1 mile south-west), Headless Cross (1 mile north), Greenlands (1 mile north-east), Lodge Park (1 mile north-east) and Callow Hill (1 mile west). We also work in nearby towns such as Worcester (13 miles south-west), Kidderminster (15 miles north-west), Bromsgrove (6 miles north-west), Droitwich Spa (9 miles west), Evesham (13 miles south) and Stourport-on-Severn (15 miles west).

Around Crabbs Cross

Our customers here include homes close to Kingsley College, St Augustine's Catholic High School and Crabbs Cross Academy and the streets around them. You will also find Fleece Hotel (less than half a mile south) and St Peter (under half a mile south). For rail, the closest station is Redditch station, about 1.7 miles north. Other landmarks nearby include Redditch Local History Museum (1.7 miles north) and Beoley (3.2 miles north-east). For a walk, there is River Arrow Nature Reserve.

Map of Crabbs Cross © OpenStreetMap contributors

Looking after it afterwards

Much of the damage we repair could have been avoided. A few tips:

  • Dry the bath after use to stop limescale
  • Do not leave bottles, razors or sponges standing on the surface
  • Have chips seen to early
  • Wash away dyes and oils after use

Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.

Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.

What affects the price in Crabbs Cross

Resurfacing from £350. Every quote is fixed and free. What we take into account:

  • The size and number of damaged areas
  • Whether we combine several jobs
  • Access to the area
  • The type of damage

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

How to get a fixed price

Photographing the damage takes a minute. Try to send:

  • The material, if you know it
  • A coin or ruler next to the damage for scale
  • A clear, close picture of the problem area
  • Details of any past repairs

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.