Lancashire · England
Bath re-enamelling & resurfacing in Crawshawbooth, Lancashire
Local bath re-enamelling for Crawshawbooth: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- An old resurfacing that’s failing
Bath re-enamelling at your home in Crawshawbooth
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Our repair technicians work on acrylic baths, cast iron baths and pressed steel baths, and common reasons people contact us are a peeling or bubbling previous coating and enamel that’s lost its shine and feels rough.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Area
- Crawshawbooth (BB4)
- County
- Lancashire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Towns and villages near Crawshawbooth
Other services in Crawshawbooth
What a repair cannot fix
A few problems are outside what a surface repair can do:
- A cast iron or steel bath that’s cracked right through
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
How we price bath re-enamelling
Prices start from £350. We give every job a fixed quote from photos. This is what makes a difference:
- Doing more than one item at once
- How much damage there is
- The type of damage
- How easy the damage is to reach
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking.
Send photos for a quote
You can usually get a fixed quote without us visiting. To make it quick:
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
What we are called out for in Crawshawbooth
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Send us a photo if you notice any of these:
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
- Worn patches where water runs and sits
- A dull, rough surface that will not come clean
Questions to ask before you book
- How your room will be protected
- When it can be used again
- What happens if they find more damage
- Whether there are any call-out or travel charges
What we do, step by step
You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we’re doing. It normally takes a full day, and you can get on with other things while we are there.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Mention any earlier repairs or resurfacing
- Open a window if you can
- Have somewhere for us to park nearby if possible
Getting a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Related advice
Where we work around Crawshawbooth
Crawshawbooth is about 2 miles north of Rawtenstall, in Lancashire. Across the BB4 area, we come to you. Crawshawbooth is one of 482 places in Lancashire we cover. You can also see our page for Manchester, about 17 miles away.
Every address in BB4 is covered, from the main roads to the quietest streets. From Pinner Lane, Burnley Road and Stoneholme Road or anywhere nearby, a technician can come to you. We also travel to Goodshaw (1 mile north), Loveclough (1 mile north), Dunnockshaw (2 miles north), Lumb (2 miles east) and Rawtenstall (2 miles south). Further out, we also cover Burnley (5 miles north), Chorley (15 miles west), Bamber Bridge (15 miles west), Accrington (4 miles north-west), Nelson (8 miles north) and Colne (10 miles north-east).
Local landmarks in Crawshawbooth
Typical jobs here are in homes near St John the Evangelist's Church, Crawshawbooth Primary School and Alder Grange School, among other places. The nearest railway station is Accrington station, about 3.9 miles north-west of the centre. Other landmarks nearby include Helmshore Mills Textile Museum (Higher Mill) (3.2 miles south-west) and Hapton Castle (4 miles north). Green spaces nearby include Hameldon Hill.
How to care for the repair
Most damage we see is avoidable. A few tips:
- Don’t leave a chip unrepaired
- Fix dripping taps quickly
- Clean with a soft cloth and mild detergent
- Leave the bath for the full curing time before using it
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
Why repair rather than replace?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- A fixed quote before you book
- Work done at your home or business
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
Read our pricing or guide to resurfacing and replacement costs.
Crawshawbooth questions
How do I get a price for bath re-enamelling in Crawshawbooth?
Resurfacing from £350. Because every job differs, we price from photos. You’ll get a fixed figure before booking.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Lancashire.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
Can you quote from pictures?
Typically, yes. Clear pictures let us give you a fixed quote without visiting.
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so let us know about it.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
About our accreditations · Every repair comes with a one-year guarantee.
