Somerset · England
Bath Re-enamelling in Crewkerne
Bath re-enamelling in Crewkerne without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Staining under the taps and around the waste
- A dull, rough surface that will not come clean
What affects the price in Crewkerne
Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:
- The type of damage
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- Access to the area
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- Any details about the material
- Details of any past repairs
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and no obligation.
About our bath re-enamelling in Crewkerne
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We’re frequently asked to fix an original cast iron bath that needs restoring and a coating lifting around the plughole, across cast iron baths, acrylic baths and Victorian roll-tops.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Crewkerne (TA18)
- Region
- Somerset
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why us?
- A fixed quote before you book
- One visit for most repairs
- Repair technicians who travel to you, UK-wide
- CHAS, Constructionline and SafeContractor accredited
Take a look at our pricing and guide to resurfacing and replacement costs.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which usually takes most of the day. If we find something your photos didn’t show, we will explain it before carrying on.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Before we arrive
- Let us know about parking or access
- Tell us about any previous repairs or coatings
- Make sure the room can be ventilated
Getting a price
If you’re in Crewkerne and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Also near Crewkerne
More services for Crewkerne
Crewkerne questions
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
What areas do you cover?
Across the UK. Our prices are the same everywhere.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Do I need to be at home?
We need someone to let us in. You don’t need to watch us work.
Signs you need bath re-enamelling in Crewkerne
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, normally first under the taps and around the waste.
These are the problems we’re asked about most:
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
What to look for in a quote
- What the guarantee covers, and for how long
- How changes to the job are handled
- Whether cleaning and preparation are in the price
- Aftercare advice
About Crewkerne
Crewkerne is about 8 miles south-west of Yeovil, in Somerset. Customers in Crewkerne get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Crewkerne is one of 640 places in Somerset where we work.
Our repair technicians cover all of TA18 and the streets around it. Whether you live on Market Street, Market Square and Langmead Square or a nearby road, we can come to you. With the A30 and A356 close by, Crewkerne is simple for us to get to. Neighbouring places we cover include Broadshard (1 mile north), Misterton (1 mile south-east), Puddle Town (2 miles north-east), Haselbury Plucknett (2 miles north-east) and North Perrott (2 miles east). We also work in nearby towns such as Yeovil (8 miles north-east), Chard (7 miles west), Somerton (12 miles north), Ilminster (6 miles north-west), Preston Plucknett (7 miles north-east) and Martock (6 miles north).
Local landmarks in Crewkerne
We visit homes around Wadham School, Christ Church and Royal Oak Public House. Also close by are Wadham School (0.5 miles north-east) and St Bartholomew's Church of England First School (within half a mile south-east). Crewkerne’s nearest station is Crewkerne station, about 0.9 miles south-east of the centre. Other landmarks nearby include Crewkerne Castle (1.5 miles north-west) and Crewkerne Community Hospital (within half a mile west). Not far away are Conegar Hill.
How to care for the repair
A little care keeps the finish looking good. Our advice:
- A quick wipe after use keeps limescale away
- Fix dripping taps quickly
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
When a repair is not the answer
To be straight with you, some problems need a different fix:
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
