Isle of Anglesey · Wales
Bath Re-enamelling for Cromlech homes
Full bath re-enamelling and resurfacing at your home in Cromlech, with a one-year guarantee on every repair.
- Resurfacing from £350
- Lots of chips and rust spots
- Stains that won’t shift
Cromlech and nearby
Cromlech is about 9 miles north-east of Blackbridge, in Isle of Anglesey. Clients in Cromlech get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Cromlech is one of 115 places in Isle of Anglesey we cover. You can also see our page for Liverpool, about 63 miles away.
We cover every part of LL67 and LL68. Neighbouring places we cover include Llanfechell (1 mile south-east), Mechell (1 mile south-east), Carreglefn (2 miles south-east), Llanddeusant (4 miles south) and Carmel (6 miles south). Further out, we also cover Holyhead (9 miles south-west), Blackbridge (9 miles south-west), Porth-y-Felin (9 miles south-west), Llangefni (12 miles south-east), Stryd (10 miles south-west) and Pont-Hwfa (10 miles south-west).
What’s near Cromlech
Our clients here include homes close to St Mechell's Church, Douglas Inn and Ysgol Gynradd Cemaes. Other landmarks nearby include Cemaes Heritage Centre (1 mile north-east) and Castell Porth Wen (3.1 miles north-east). For a walk, there’s Trwyn yr Wylfa and Mynydd y Garn.
Bath re-enamelling in Cromlech without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we don’t cut corners on it. If you’re dealing with lots of chips and rust spots and a coloured bath you want in white, we can help, on Victorian roll-tops, basins & shower trays and cast iron baths alike.
You get a one-year guarantee, the same in Cromlech as everywhere else we work.
- Where
- Cromlech (LL67, LL68)
- County
- Isle of Anglesey
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Cromlech
More services for Cromlech
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Common problems we fix in Cromlech
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
The things clients typically mention when they call are:
- Several chips and rust patches
- An old resurfacing that is failing
- A dull, rough surface that will not come clean
- Worn patches where water runs and sits
Before you book anyone
- A fixed quote, and whether VAT is included
- Whether there are any call-out or travel charges
- When it can be used again
- What happens if the damage is worse than the pictures show
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
How it works
You do not need to empty the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. Most jobs take the best part of a day, and you are welcome to carry on with your day while we work.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Open a window if you can
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
How to get a price
Upload pictures of the damage and a wider shot of the entire item, with your LL67 postcode, and we’ll reply with a fixed price.
Read more
When we’d advise against a repair
Before you book, it’s worth knowing the limits too:
- Leaks from fittings rather than the bath
- A bath split right through the body
- Holes rusted through the metal
Send us pictures and we’ll tell you honestly.
Materials we work on in Cromlech
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Repair dripping taps early
- Use washing-up liquid and a soft cloth
- Avoid suction-cup mats
- Don’t use the bath until it has fully cured
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Cromlech as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Cromlech questions
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
Can pets and children be at home?
Just keep them out of the work area. We will let you know when it’s safe to use again.
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Is there a guarantee?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Repair or replace: which is better?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Prices start from £350. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why Cromlech clients choose us
- Rooms protected and left tidy
- Straight answers about what a repair can do
- Same prices wherever you are
- Technicians who travel to you, UK-wide
Read our pricing and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
