Isle of Anglesey · Wales
Bath Re-enamelling for Llanfechell homes
Bath re-enamelling across Llanfechell and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- Staining under the taps and around the waste
How we handle bath re-enamelling in Llanfechell
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for a peeling or bubbling previous coating and brown or grey marks that don’t clean off, on Victorian roll-tops, basins & shower trays and acrylic baths.
All our work is covered by our one-year guarantee, wherever you are in Isle of Anglesey.
- Location
- Llanfechell (LL68)
- Area hub
- Isle of Anglesey
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
So the finish stays in good condition:
- Wash away dyes and oils after use
- A dripping tap should be fixed promptly
- Keep suction mats out of the bath
- Respect the curing time we give you
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Towns and villages near Llanfechell
More services for Llanfechell
What we are called out for in Llanfechell
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Keep an eye out for any of the following:
- A roll-top that is seen better days
- Chips and rust in more than one place
- A bath in a colour that no longer suits
- A coating lifting around the plughole
Questions to ask before you book
- If travel is included in the price
- What protection goes down before work starts
- When it can be used again
- What happens if the damage is worse than the pictures show
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the day after. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Llanfechell
- We’ll tell you if it’s not worth repairing
- Accredited with CHAS, Constructionline and SafeContractor
- We come to you, anywhere in the UK
- No need to remove anything
See our full price list or resurfacing vs replacement cost guide.
Honest limits
Not everything can be repaired, and we would rather say so up front. Repairs will not solve:
- Problems we cannot see until an old finish comes off
- A bath split right through the body
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
What we do, step by step
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take a full day.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the following day.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
How to get a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Read more
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Llanfechell questions
Which areas do you work in?
We cover the whole UK, including Llanfechell and the rest of Isle of Anglesey. Just include your postcode and we will confirm dates.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
How much does bath re-enamelling cost in Llanfechell?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Landlords, agents and businesses in Llanfechell
We are used to working with agents and managing companies. Send the address, photos and access details.
We work for landlords, letting agents and housing providers in Llanfechell as well as homeowners. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Llanfechell and nearby
Llanfechell is about 9 miles north-east of Holyhead, in Isle of Anglesey. Clients in Llanfechell get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. We cover 115 places in Isle of Anglesey, from the larger towns to small villages. Our jobs stretch from Llanfechell to Liverpool (about 63 miles away).
We cover every part of LL68. From Lôn Mynydd, Stad Glanrafon and Stad Maes y Plas or a nearby road, a technician can come to you. Close by, we cover Mechell (1 mile south-east), Cromlech (1 mile north-west), Carreglefn (2 miles south-east), Llanddeusant (4 miles south) and Carmel (6 miles south). We also work in nearby towns such as Holyhead (9 miles south-west), Blackbridge (9 miles south-west), Porth-y-Felin (9 miles south-west), Llangefni (11 miles south-east), Stryd (10 miles south-west) and Pont-Hwfa (10 miles south-west).
Near you in Llanfechell
We visit homes around Ysgol Gymuned Llanfechell, St Mechell's Church and Y Cefn Glas pub. Well-known places in the area include Cemaes Heritage Centre (1.4 miles north) and Castell Porth Wen (3.1 miles north-east). Not far away are Trwyn yr Wylfa and Llyn Bwch.
About our accreditations · Every repair comes with a one-year guarantee.
