Carmarthenshire · Wales

Bath re-enamelling & resurfacing in Cross Hands, Carmarthenshire

Full bath re-enamelling and resurfacing in Cross Hands, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • An old resurfacing that’s failing
  • Enamel that’s lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Cross Hands

Prices and what affects them

Prices start from £350. Prices are worked out job by job. The main factors are:

  • How many items we do on one visit
  • How much damage there is
  • Access to the area
  • Any earlier repairs that need removing first

A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Getting a price from pictures

Phone photos are fine, there is no need for anything special. Just ensure we can see:

  • Natural light rather than flash
  • The postcode, so we can plan the visit
  • Whether it’s been repaired or coated before
  • Any details about the material

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Bath re-enamelling in Cross Hands, done in place

After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We regularly repair acrylic baths, basins & shower trays and Victorian roll-tops, and common reasons people contact us are chips and rust in more than one place and wear marks under the taps.

Big or small, it’s backed by a one-year guarantee in Cross Hands and across Carmarthenshire.

Stained basin resurfaced to clean white (before and after)
Where
Cross Hands (SA14)
Area hub
Carmarthenshire
Warranty
A year, on every repair
Quote
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026

For landlords and businesses

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

What we can’t put right

Some jobs are not right for a repair, for example:

  • Plumbing leaks, which need a plumber
  • A metal bath with a through crack
  • A bath that’s rusted through

Not sure? Send photos and we will give you a straight answer.

Materials we repair

  • Basins & shower trays
  • Victorian roll-tops
  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths

What your bath is made of matters

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.

How the visit works

Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which generally takes a full day. If we find something your pictures didn’t show, we’ll explain it before carrying on.

  1. We mask and protect the room and ventilate it.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. The bath is left to cure and can usually be used the day after.

How to prepare

  • Keep pets and children out of the room while we work
  • Let us know which floor the room is on
  • Avoid using the area for a few hours before we arrive

Get a quote

Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you’re under no obligation.

Get a free quote

Read more

What we’re called out for in Cross Hands

A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.

Customers typically contact us about:

  • An original cast iron bath that needs restoring
  • An outdated colour you’d like to change
  • A dull, rough surface that won’t come clean
  • Several chips and rust patches

Comparing quotes

  • How to look after the finish
  • Who will actually do the work
  • If travel is included in the price
  • What the guarantee covers, and for how long

Our hiring checklist

Covering Cross Hands

Cross Hands is about 8 miles north of Llanelli, in Carmarthenshire. We travel to homes and businesses in Cross Hands, so there’s no workshop to go to. Cross Hands is one of 195 towns and villages in Carmarthenshire where we work.

We cover every part of SA14. Jobs here include addresses on Pontardulais Road, Woodlands Terrace and Tirwaun. With the A476 close by, Cross Hands is simple for us to get to. We also travel to Cwm-y-glo (1 mile north-west), Gors-goch (1 mile east), Morfa (1 mile east), Cwmgwili (1 mile south-east) and Capel Hendre (2 miles east). Within a short drive, we also cover Llanelli (8 miles south), Carmarthen (10 miles north-west), Llanelli Rural (9 miles south-west), Bigyn (8 miles south), Wern (9 miles south) and Ammanford (4 miles east).

Local landmarks in Cross Hands

Typical jobs here are in homes near Ysgol Gynradd Gorslas, The Crosshands Hotel and Ysgol y Gwendraeth, among other places. The closest station to Cross Hands is Ammanford station, about 3.8 miles east. Well-known places in the area include Mynydd Mawr Hospital (1.8 miles south-west) and Castell y Rhingyll (1.6 miles north-east). For a walk, there is Pen y Tymbl and Llyn Llech Owain.

Map of Cross Hands © OpenStreetMap contributors

Why repair rather than replace?

Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Why Cross Hands clients choose us

  • We leave the room as we found it
  • Colour mixed on the day to match
  • CHAS and Constructionline accredited
  • Most jobs done in one visit

See our prices page and bath cost comparison.

Your questions about bath re-enamelling in Cross Hands

Is there a smell?

Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.

Is it messy?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Can you redo someone else’s repair?

Yes, we frequently do. Removing the old work can add time, and that’s in the quote.

Can you do the outside of a roll-top?

Yes. We can do the inside and outside.

Are there extra charges for Cross Hands?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

How long will the bath be out of use?

One day for most baths and can be used the day after. We’ll confirm timings when we quote.

When can you do it?

We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.