Ceredigion · Wales
Bath re-enamelling & resurfacing in Cross Inn, Ceredigion
We travel to Cross Inn for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Staining under the taps and around the waste
- Worn patches where water runs and sits
Bath re-enamelling in Cross Inn, done in place
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Whether it’s several chips and rust patches and an outdated colour you’d like to change, we can normally put it right, on acrylic baths, pressed steel baths and cast iron baths alike.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Where
- Cross Inn (SA44)
- County
- Ceredigion
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Cross Inn
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Typical reasons for a call-out include:
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
- Several chips and rust patches
- A coloured bath you want in white
Before you book anyone
- How the colour is matched
- What prep work is covered
- How the room is protected while they work
- A fixed quote, and whether VAT is included
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
For landlords and businesses
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
What we do, step by step
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. Allow the best part of a day, and we’ll tell you if anything changes.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the day after.
Before we arrive
- Point us to the nearest place to park
- Open a window if you can
- Mention any earlier repairs or resurfacing
Getting a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Read more
Cross Inn and the surrounding area
Cross Inn is about 23 miles north of Carmarthen, in Ceredigion. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Cross Inn is one of 125 places in Ceredigion we cover.
Here we cover the SA44 postcode area. Jobs here include addresses on Maes yr Halen, Lon Rhydalen and Heol y Cwm and the roads around them. Neighbouring places we cover include Llanllwchaiarn (1 mile north-east), Llanllwchhaearn (1 mile south-east), Pentre'r Bryn (1 mile south), Synod Inn (2 miles south-east) and Rhyd-y-Beillen (2 miles south-east). We also work in nearby towns such as Aberteifi (15 miles south-west), Aberaeron (5 miles north-east), Lampeter (13 miles south-east), Bridgend (15 miles south-west) and Llandysul (10 miles south).
Around Cross Inn
Locally, our jobs take us to homes close to Penrhiwgaled Arms, among other places. A little further out are Aberaeron Hospital (5.5 miles north-east) and Castell Caer Wedros (1.3 miles south-west). For a walk, there’s Allt Cefn Gwyddyl.
- Local facilities include Cydplwyf (0.7 miles north-east)
Can I fix it myself?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Also near Cross Inn
Also in Cross Inn
What affects the price in Cross Inn
Prices start from £350. There’s no charge for travel to Cross Inn. The price depends on:
- How hard the colour is to match
- How much damage there is
- Whether we combine several jobs
- What the surface is made of
Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
When you take your pictures, these tips help us give you a firm price:
- One picture of the whole bath
- Something in shot to show the size
- Details of any past repairs
- Your postcode, so we can check dates
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
FAQs for Cross Inn
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
What happens after I send pictures?
You get a fixed quote and available dates. If we need another angle, we will ask.
Is a repair better than a new one?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you work in Cross Inn?
Yes. We work across the UK and come to Cross Inn. Send pictures and we will quote, or call 0345 017 0787.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Can you repair something that’s been repaired before?
Generally, yes. Tell us what was done before and we’ll plan for it.
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- A cast iron or steel bath that’s cracked right through
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in Cross Inn
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Repair or replace: which is better?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. The price reflects the work involved, not your postcode. The full price is agreed before booking.
Why us?
- One visit for most repairs
- Same prices wherever you are
- A year’s guarantee on all work
- No need to remove anything
Read our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
