Ceredigion · Wales
Bath Re-enamelling for Rhyd-y-Beillen homes
Damaged bath in Rhyd-y-Beillen? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- A dull, rough surface that won’t come clean
Questions from Rhyd-y-Beillen
How much does bath re-enamelling cost in Rhyd-y-Beillen?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
What information do you need?
Send pictures through the quote form or call 0345 017 0787.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Are there extra charges for Rhyd-y-Beillen?
No. Our quotes include travel, with the same prices everywhere we work.
Can you redo someone else’s repair?
Typically, yes. We remove the old repair before doing a new one, so let us know about it.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Bath re-enamelling at your home in Rhyd-y-Beillen
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s stains that won’t shift and an old resurfacing that’s failing, we can normally put it right.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Rhyd-y-Beillen (SA44, SA47)
- Region
- Ceredigion
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
We’ll always be straight with you, so here’s what a repair cannot fix:
- A metal bath with a through crack
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we will tell you honestly.
What we work on
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What bath re-enamelling costs
Prices start from £350. Prices are worked out job by job, from your photos. The main factors are:
- What the surface is made of
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- The colour and finish to match
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
Photographing the damage takes a minute. Try to send:
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- A wider photo showing the whole bath
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
For landlords and businesses
For anyone letting property in or around Rhyd-y-Beillen, we will quote for several properties at once. Send photos for each one and we’ll price them together.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Nearby places to Rhyd-y-Beillen
Also in Rhyd-y-Beillen
Should you replace it?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- We leave the room as we found it
- Every repair guaranteed for a year
- Colours mixed by hand to suit your surface
- Honest advice, even when it means no job
Read our full price list or resurfacing vs replacement cost guide.
Our work in Rhyd-y-Beillen
Rhyd-y-Beillen is about 20 miles south-west of Aberystwyth, in Ceredigion. Clients in Rhyd-y-Beillen get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Rhyd-y-Beillen is one of 125 places in Ceredigion we cover.
All of SA44 and SA47 is within our area. Close by, we cover Synod Inn (1 mile west), Pentre'r Bryn (1 mile west), Llanllwchhaearn (1 mile north), Llanllwchaiarn (2 miles north) and Cross Inn (2 miles north-west). We also work in nearby towns such as Aberteifi (15 miles west), Aberaeron (6 miles north-east), Lampeter (11 miles east), Bridgend (15 miles south-west), New Quay (3 miles north) and Llandysul (9 miles south).
Near you in Rhyd-y-Beillen
Locally, our jobs take us to homes close to Ysgol Bro Sion Cwilt, St Mark's Church and Synod Inn. Nearby you’ll also find Cydplwyf (2.2 miles north) and New Quay Heritage Centre (3.5 miles north). Open spaces near Rhyd-y-Beillen include Moel Brynsilio.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Rinse off hair dye, oils and bath bombs right away
- Get any chip repaired quickly
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Before we arrive
- Ensure the area is dry
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
