Fife · Scotland
Bath re-enamelling & resurfacing in Crossgates, Fife
Bath re-enamelling in Crossgates without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- Worn patches where water runs and sits
- Staining under the taps and around the waste
About our bath re-enamelling in Crossgates
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. It avoids removal, plumbing and re-tiling. Common call-outs are for chips and rust in more than one place and an old resurfacing that’s failing, in basins & shower trays, Victorian roll-tops and cast iron baths.
Big or small, you get the same one-year guarantee.
- Location
- Crossgates (KY4)
- Area hub
- Fife
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- No need to remove anything
- Same prices wherever you are
- Technicians who travel to you, UK-wide
- Fixed prices from your photos
Read our full price list and bath cost comparison.
When we would advise against a repair
Before booking, it’s worth knowing the limits too:
- A cast iron or steel bath that’s cracked right through
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we will say what we think.
What we work on
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Landlord and trade work in Crossgates
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
For anyone letting property in or around Crossgates, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
What happens on the day
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take the best part of a day, including clearing up.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the next day.
How to prepare
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
Ask for a price
If you’re in Crossgates and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Our work in Crossgates
Crossgates is about 3 miles north-east of Dunfermline, in Fife. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Crossgates is one of 133 towns and villages in Fife we cover. You can also see our page for Edinburgh, about 12 miles away.
Our repair technicians cover all of the KY4 postcode area. Whether you live on Main Street, Cobden Court and Springhill Brae or anywhere nearby, we can come to you. We also travel to Hill of Beath (1 mile north), Fordell Firs (2 miles south), Hillend (3 miles south), Dalgety Bay (3 miles south) and Inverkeithing (4 miles south). Larger places within reach include Dunfermline (3 miles south-west), Kirkcaldy (9 miles east), Glenrothes (11 miles north-east), Dysart (10 miles east), Rosyth (4 miles south-west) and Methil (15 miles north-east).
Around Crossgates
Typical jobs here are in homes near Woodmill High School and Crossgates Parish Church, among other places. The closest station to Crossgates is Dunfermline Queen Margaret station, about 1.9 miles west of the centre. A little further out are Fordell Castle (2.1 miles south) and Dunfermline Carnegie Library & Galleries (3.5 miles west). Not far away are Loch Fitty.
Towns and villages near Crossgates
Also in Crossgates
Crossgates: your questions answered
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you cover Crossgates?
Yes, we do. Technicians travel to Crossgates from across the region, with no extra charge for travel.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How do I get a price for bath re-enamelling in Crossgates?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
How do I book?
Some photos, your postcode and how to reach you. On the day, access to the room.
Are there extra charges for Crossgates?
Travel is included in the price, and we charge the same wherever you are.
Will the price change on the day?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
What affects the price in Crossgates
Resurfacing from £350. There’s no area surcharge for Crossgates. The price reflects:
- The size and number of damaged areas
- The type of damage
- The colour and finish to match
- The material and finish
A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with nothing added on the day.
Getting a price from photos
The better the photos, the more accurate the price. Here’s what helps:
- A clear, close picture of the problem area
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
When to call us in Crossgates
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
The most common problems we’re called about are:
- Wear marks under the taps
- A coating lifting around the plughole
- Chips and rust in more than one place
- Stains that won’t shift
What to look for in a quote
- Aftercare advice
- Whether cleaning and preparation are in the price
- The length of the guarantee and what it covers
- A fixed quote, and whether VAT is included
Aftercare tips
So the finish stays in good condition for years:
- Fix dripping taps quickly
- Keep suction mats out of the bath
- Store bottles off the bath
- Wipe the bath dry after use in hard water areas
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
