Surrey · England
Bath re-enamelling & resurfacing in Crowhurst, Surrey
Bath re-enamelling in and around Crowhurst: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A coating lifting around the plughole
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- A fixed quote before you book
- Nothing taken out or refitted
- We leave the room as we found it
- One visit for most repairs
Read our prices page and bath cost comparison.
How we handle bath re-enamelling in Crowhurst
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Our technicians work on cast iron baths, pressed steel baths and acrylic baths, and common reasons people get in touch are an outdated colour you’d like to change and a roll-top that’s seen better days.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Area
- Crowhurst (RH7)
- Area hub
- Surrey
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Crowhurst
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We work for landlords, letting agents and housing providers in Crowhurst as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Common questions in Crowhurst
Do you charge for travel?
There is no separate call-out charge. The fixed quote covers the visit and the work.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Do you work in Crowhurst?
We do. Technicians travel to Crowhurst from across the region, with no extra charge for travel.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
How do I book?
Send pictures through the quote form or call 0345 017 0787.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
What we can’t put right
It helps to know what we cannot do too:
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that’s cracked right through
Send us photos and we will tell you honestly before booking.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Nearby places to Crowhurst
Also in Crowhurst
Covering Crowhurst
Crowhurst is about 6 miles north of East Grinstead, in Surrey. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 395 places in Surrey. Our jobs stretch from Crowhurst to London (20 miles away).
Jobs in RH7 work the same way as everywhere else we cover. If you’re just outside Crowhurst, we cover Crowhurst Lane End (1 mile north-west), Merle Common (1 mile north-east), South Godstone (2 miles north-west), Troy Town (2 miles east) and Tandridge (2 miles north-west). Larger places within reach include Epsom (14 miles north-west), Horley (7 miles west), Redhill (7 miles west), Ewell (15 miles north-west), Reigate (8 miles west) and Caterham (6 miles north-west).
Landmarks near Crowhurst
In Crowhurst, that means homes near Church of St George and the streets around them. The nearest railway station is Godstone station, roughly 1.9 miles west. A little further out are Haxted Watermill Museum (2.1 miles south-east) and Bletchingley Castle (4.7 miles north-west). Not far away are Hedgecourt Lake and Botley Hill.
Common problems we fix in Crowhurst
Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is typically as strong as ever.
Keep an eye out for these signs:
- Enamel that is lost its shine and feels rough
- Thin, worn enamel in places
- Staining under the taps and around the waste
- Several chips and rust patches
Before booking anyone
- Whether they match the colour on site
- Who turns up on the day
- When it can be used again
- Whether there are any call-out or travel charges
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Dry the bath after use to stop limescale
- Have chips seen to early
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
What bath re-enamelling costs
Resurfacing from £350. There is no area surcharge for Crowhurst. The price reflects:
- What the surface is made of
- How much damage there is
- How hard the colour is to match
- Whether we combine several jobs
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Getting a price from photos
You can take the pictures on your phone. Just make sure we can see:
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- A close-up of the damage, in focus
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
How the visit works
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes the best part of a day for most jobs. The room is left tidy.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Mention if the room is upstairs or in a flat
- Make sure the area is dry
How to get a price
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll say right away if a repair is the right fix.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
