Shropshire · England
Bath re-enamelling & resurfacing in Crumpsbrook, Shropshire
Full bath re-enamelling and resurfacing for homes and businesses in Crumpsbrook and across Shropshire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Wear marks under the taps
- Chips and rust in more than one place
Repairing versus replacing in Crumpsbrook
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the whole surface with the bath left where it is. Prices start from £350. We charge the same wherever you are, with no extra for Crumpsbrook. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- CHAS and Constructionline accredited
- Colour-matched on site
- Technicians who travel to you, UK-wide
- Everything repaired in place
Read our pricing or guide to resurfacing and replacement costs.
How we handle bath re-enamelling in Crumpsbrook
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Whether it’s worn patches where water runs and sits and enamel that’s lost its shine and feels rough, we can help, whatever the material.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Crumpsbrook (DY14)
- Region
- Shropshire
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Crumpsbrook
More services for Crumpsbrook
Crumpsbrook and nearby
Crumpsbrook is about 11 miles south-west of Bridgnorth, in Shropshire. Jobs in Crumpsbrook are booked in like any other job: a fixed quote from photos, then a visit to do the work. Crumpsbrook is one of 433 places in Shropshire we cover. Our jobs stretch from Crumpsbrook to Birmingham (28 miles away).
Our visits in DY14 work the same way as everywhere else we cover. Neighbouring places we cover include Hints (2 miles south-west), Cleehill (3 miles south-west), Knowle (3 miles south-west), Newnham Bridge (5 miles south) and Spurtree (6 miles south). Within a short drive, we also cover Bridgnorth (11 miles north-east), Ludlow (7 miles west), Broseley (15 miles north), Church Stretton (15 miles north-west), Craven Arms (13 miles west) and Much Wenlock (14 miles north).
Near you in Crumpsbrook
Our clients here include homes close to The Crown Inn and Church of St Michael, among other places. Further afield, we also cover the area around Aston Botterell Ringwork (4 miles north). For a walk, there’s Catherton Common and Clee Hill.
Landlords, agents and businesses in Crumpsbrook
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Aftercare tips
After the repair has cured, a few habits help it last:
- Dry the bath after use to stop limescale
- Have chips seen to early
- Don’t let dyes or oils sit on the finish
- Repair dripping taps early
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Crumpsbrook: your questions answered
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Are there extra charges for Crumpsbrook?
There’s no separate call-out charge. Your fixed price includes everything.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders in Crumpsbrook.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
The process
Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Plan for the best part of a day. Before leaving, we tell you when it can be used and how to care for it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Make sure the area is dry
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and no obligation.
Advice
What affects the price in Crumpsbrook
Prices start from £350. There’s no charge for travel to Crumpsbrook. The price depends on:
- How many items we do on one visit
- The size and number of damaged areas
- The colour and finish to match
- What kind of damage it is
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- Details of any past repairs
- The material, if you know it
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
When we would advise against a repair
Some jobs aren’t right for a repair, for example:
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
- Steel that has corroded right through
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
