Shropshire · England
Bath Re-enamelling for Broseley homes
Fixed-price bath re-enamelling in Broseley and the surrounding area, normally in one visit.
- Resurfacing from £350
- An old resurfacing that is failing
- Lots of chips and rust spots
About our bath re-enamelling in Broseley
Most baths are re-enamelled in a day, and you can use the bath the day after. Taps, tiles, panels and plumbing all stay in place. If you are dealing with lots of chips and rust spots and thin, worn enamel in places, we can help.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Broseley (TF12)
- Region
- Shropshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- How hard the colour is to match
- Where the damage is and how we get to it
- The type of damage
- The material
We charge the same wherever you are, with no extra for Broseley. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from photos
Before you send pictures, these tips help us give you a firm price:
- One picture of the entire bath
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- Any details about the material
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Common questions in Broseley
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you will get one combined price.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote from your photos. Send a close-up and a photo of the whole item with your TF12 postcode.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
How long does re-enamelling take?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Landlord and trade work in Broseley
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
What a repair cannot fix
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Leaks from fittings rather than the bath
- A bath that is rusted through
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Broseley
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
What we’re called out for in Broseley
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Most people contact us when they notice one of these:
- Brown or grey marks that don’t clean off
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
- An old resurfacing that is failing
What your quote should include
- What aftercare is recommended
- When it can be used again
- What the guarantee covers, and for how long
- How changes to the job are handled
How it works
Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow most of the day from start to finish. Before we go, we will explain how long to leave it and how to look after it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Make sure the room can be ventilated
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Read more
Nearby places to Broseley
Also in Broseley
Where we work around Broseley
Broseley is about 5 miles south of Telford, in Shropshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Broseley is one of 433 places in Shropshire where we work. We work right across the region, from Broseley to Birmingham (about 27 miles away).
We cover every part of TF12. We regularly work on streets such as High Street, Birch Row and Haycop Rise. Main roads around Broseley include the B4373 and B4375, which makes travel easy. If you are just outside Broseley, we cover Benthall (1 mile west), Ironbridge (1 mile north), Jackfield (1 mile north-east), The Tuckies (1 mile east) and Preens Eddy (1 mile east). Further out, we also cover Shrewsbury (13 miles north-west), Bridgnorth (6 miles south-east), Coleham (13 miles north-west), Kingsland (13 miles north-west), Belle Vue (13 miles north-west) and Monkmoor (13 miles north-west).
Landmarks near Broseley
Locally, our jobs take us to homes close to Abraham Darby Academy, Church of All Saints and Broseley CE Primary School and the streets around them. Broseley’s nearest station is Telford Central station, roughly 5 miles north. A little further out are Broseley Pipeworks (less than half a mile north-west) and Bridgnorth Community Hospital (5.8 miles south-east).
Repair or replace: which is better?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why choose Surface Doctor in Broseley
- Free fixed quotes from pictures
- Everything repaired in place
- Honest advice, even when it means no job
- Every repair guaranteed for a year
Read our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
