Somerset · England
Bath Re-enamelling in Curry Mallet
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Curry Mallet. Send photos for a free, fixed quote.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Brown or grey marks that don’t clean off
How we handle bath re-enamelling in Curry Mallet
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We work on acrylic baths, Victorian roll-tops and cast iron baths, and people most frequently call us about a bath that stays dull however much you clean it and wear marks under the taps.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Location
- Curry Mallet (TA3)
- County
- Somerset
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Curry Mallet
Curry Mallet is about 6 miles east of Taunton, in Somerset. Anywhere in TA3, we come to you. We work in all 640 towns and villages in Somerset, from the larger towns to small villages.
We cover every part of TA3. Whether you live on Headwell Hill, Silver Street and Higher Street or a nearby road, a technician can come to you. Other places close to Curry Mallet include Beercrocombe (1 mile south-west), Hatch Beauchamp (2 miles south-west), Isle Abbotts (2 miles east), Stewley (2 miles south) and Hatch Green (2 miles south-west). Further out, we also cover Taunton (6 miles west), Bridgwater (10 miles north), Yeovil (14 miles east), Chard (8 miles south), Wellington (12 miles west) and Street (13 miles north-east).
Local landmarks in Curry Mallet
Around Curry Mallet, we work in homes near Curry Mallet Church of England Primary School, The Bell Inn and Church of St James and the streets around them. Nearby you will also find Willows and Wetlands Visitor Centre (3.9 miles north). Open spaces near Curry Mallet include Swell Wood RSPB Nature Reserve.
Curry Mallet: your questions answered
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up and a photo of the entire item with your TA3 postcode.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you price it without visiting?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Honest limits
It helps to know what we cannot do:
- Plumbing leaks, which need a plumber
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Don’t leave bottles, razors or sponges standing on the surface
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
- A quick wipe after use keeps limescale away
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Why repair rather than replace?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
What you get with us
- One price list for the entire UK
- CHAS and Constructionline accredited
- Normally one visit, start to finish
- We’ll tell you if it’s not worth repairing
Take a look at our full price list or bath cost comparison.
Places near Curry Mallet
Other services in Curry Mallet
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to the best part of a day.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Let us know which floor the room is on
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Related advice
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
How we price bath re-enamelling
Resurfacing from £350. We price every job individually. The main factors are:
- How easy the damage is to reach
- Doing more than one item at once
- Previous DIY repairs that have to come out
- How much damage there is
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
We price nearly every job from photos. This is what we need:
- One picture of the entire bath
- Any earlier repairs or coatings
- The material, if you know it
- Where you are, by postcode
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
About our accreditations · Every repair comes with a one-year guarantee.
