Somerset · England
Bath re-enamelling & resurfacing in Wellington, Somerset
Bath re-enamelling across Wellington and nearby, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- Worn patches where water runs and sits
Bath re-enamelling in Wellington without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We are frequently asked to fix brown or grey marks that don’t clean off and an old resurfacing that’s failing, on basins & shower trays, cast iron baths and Victorian roll-tops.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Location
- Wellington (TA21)
- County
- Somerset
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes the best part of a day. If anything looks different from your photos, we will talk to you before going ahead.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the following day.
Before we arrive
- Keep a parking space free if you can
- Have a window or extractor fan available
- Clear toiletries, mats and anything else from around the area
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
Looking after it afterwards
So the finish stays in good condition for years:
- Do not leave bottles, razors or sponges standing on the surface
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs immediately
- A dripping tap should be fixed promptly
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Landlord and trade work in Wellington
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Where we work around Wellington
Wellington is about 6 miles south-west of Taunton, in Somerset. From the centre of Wellington to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 640 places across Somerset.
Here we cover the TA21 postcode area. From High Street, Station Road and White Hart Lane or a nearby road, a technician can come to you. With the A38 and B3187 close by, Wellington is simple for us to get to. Neighbouring places we cover include Rockwell Green (1 mile south-west), Chelston (1 mile east), Westford (1 mile west), Bagley Green (1 mile south-west) and Pleamore Cross (2 miles south-west). Larger places within reach include Taunton (6 miles north-east), Bridgwater (14 miles north-east), Chard (14 miles south-east), Sydenham (15 miles north-east), Wilton (6 miles east) and Comeytrowe (4 miles north-east). Wellington is one of the larger places we cover in Somerset.
Local landmarks in Wellington
In Wellington, that means homes near Rule 7 pub, St John's Church of England Primary School and Court Fields School, among other places. A little further out are Merrifield Children's Unit (4.5 miles north). For a walk, there’s Knowle Hill.
What we cannot put right
A repair isn’t right for every job, for example:
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
- A bath that’s rusted through
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
What we are called out for in Wellington
Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is typically as strong as ever.
Common reasons people in Wellington contact us are:
- A coloured bath you want in white
- Chips and rust in more than one place
- A roll-top that’s seen better days
- Stains that won’t shift
What your quote should include
- Whether a trained technician does the job
- How the colour is matched
- If travel is included in the price
- How soon you can use it again
Your questions about bath re-enamelling in Wellington
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
How much does bath re-enamelling cost in Wellington?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send photos.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Should you replace it?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
What you get with us
- One price list for the whole UK
- Technicians who travel to you, UK-wide
- One visit for most repairs
- Dust sheets down, tidy finish
Take a look at our full price list or resurfacing vs replacement cost guide.
Places near Wellington
What else we do in Wellington
How we price bath re-enamelling
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- How hard the colour is to match
- The material
- Doing more than one item at once
- Any earlier repairs that need removing first
The price reflects the work involved, not where you live. You will see the full price before you book, with no extras added later.
How to get a fixed quote
You can take the photos on your phone, there’s no need for anything special. Just make sure we can see:
- A wider photo showing the entire bath
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
The quickest way to a price is to send two or three photos through our quote form or ring us. We will tell you honestly whether it can be repaired.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
