Highland · Scotland
Bath Re-enamelling for Dalwhinnie homes
Bath re-enamelling for Dalwhinnie, without a refit. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- Several chips and rust patches
- Staining under the taps and around the waste
Bath re-enamelling at your home in Dalwhinnie
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Whether it’s a peeling or bubbling previous coating and stains that won’t shift, we can generally put it right, on cast iron baths, basins & shower trays and acrylic baths alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Dalwhinnie (PH19)
- Area hub
- Highland
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Dalwhinnie
Dalwhinnie is about 37 miles south of Inverness, in Highland. Jobs in Dalwhinnie are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Dalwhinnie is one of 253 towns and villages in Highland where we work. You can also see our page for Glasgow, about 75 miles away.
Jobs in PH19 are booked in the same way as anywhere else. You will find streets such as General Wade's Military Road, Trium View and Ben Alder Road, and we cover them all. Nearby, we also work in Etteridge (6 miles north-east), Laggan (6 miles north), Gergask (6 miles north), Newtonmore (10 miles north-east) and Kingussie (12 miles north-east). For island and remote addresses, call first so we can plan the visit.
What’s near Dalwhinnie
Dalwhinnie has its own railway station: Dalwhinnie station. Green spaces nearby include Loch Caoldair.
Do you need bath re-enamelling in Dalwhinnie?
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Common reasons people in Dalwhinnie contact us are:
- A dull, rough surface that won’t come clean
- Several chips and rust patches
- A coating lifting around the plughole
- Thin, worn enamel in places
Comparing quotes
- Whether a trained technician does the job
- The length of the guarantee and what it covers
- When it can be used again
- If travel is included in the price
Honest limits
A repair is not always the answer, and we’ll tell you before we start. Repairs won’t solve:
- A cast iron or steel bath that is cracked right through
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Aftercare tips
Most damage we see is avoidable. A few tips:
- Use washing-up liquid and a soft cloth
- A dripping tap should be fixed promptly
- Respect the curing time we give you
- Avoid suction-cup mats
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Should you replace it?
A replacement frequently means several trades over several days. Re-enamelling is one technician, generally one day, with the bath back in use the next day. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there is no premium for Dalwhinnie. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Dalwhinnie customers choose us
- Honest advice, even when it means no job
- Everything repaired in place
- Colour mixed on the day to match
- One-year guarantee on every repair
Read our pricing and bath cost comparison.
The process
We agree an arrival time beforehand, so you know when to expect us. On site, it takes the best part of a day in most cases. The room is left tidy and ready to use once it has cured.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
How to get a price
The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Read more
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Dalwhinnie. The price depends on:
- What the surface is made of
- Where the damage is and how we get to it
- How hard the colour is to match
- Any earlier repairs that need removing first
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Quotes from your pictures
Phone pictures are fine. Just ensure we can see:
- What it’s made of, if you know
- One picture of the whole bath
- The postcode, so we can plan the visit
- Details of any past repairs
Upload a picture of the damage and one of the whole item, and tell us you are in Dalwhinnie, and we’ll come back with a fixed quote.
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
FAQs for Dalwhinnie
Is there a call-out fee?
There is no separate call-out charge. The fixed quote covers the visit and the work.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
How long is the bath unusable?
One day for most baths, ready the day after. We give you timings with the quote.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can you quote from pictures?
Nearly always. If photos don’t show enough, we will ask for another angle.
What areas do you cover?
Everywhere in the UK, Dalwhinnie included. There is no extra charge for travel.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
What else we do in Dalwhinnie
About our accreditations · Every repair comes with a one-year guarantee.
