Wiltshire · England
Bath Re-enamelling in Dauntsey
Bath re-enamelling across Dauntsey and nearby, usually in one visit.
- Resurfacing from £350
- Thin, worn enamel in places
- Lots of chips and rust spots
Bath re-enamelling at your home in Dauntsey
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s a bath in a colour that no longer suits and wear marks under the taps, we can normally put it right.
All our work comes with a one-year guarantee.
- Where
- Dauntsey (SN15)
- Region
- Wiltshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
Can I fix it myself?
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Common problems we fix in Dauntsey
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
People usually call us when they notice something like this:
- A roll-top that is seen better days
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
- Lots of chips and rust spots
Questions to ask before booking
- A fixed price, and whether VAT is included
- What protection goes down before work starts
- How long the guarantee is and what it covers
- Whether the colour is mixed to match
Where we work around Dauntsey
Dauntsey is about 7 miles north of Calne, in Wiltshire. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. Our repair technicians cover 425 places in Wiltshire, from the larger towns to small villages. We work right across the region, from Dauntsey to Birmingham (65 miles away).
Jobs in SN15 work the same way as everywhere else we cover. Jobs here include addresses on Middle Farm Close, Middle Green Lane and Old Sodom Lane. We also travel to Greenman's Lane (1 mile south-west), Dauntsey Lock (1 mile south), Upper Town (2 miles south-west), Great Somerford (2 miles west) and Little Somerford (2 miles north-west). Larger places within reach include Chippenham (8 miles south-west), Calne (7 miles south), Devizes (13 miles south), Melksham (13 miles south-west), Corsham (11 miles south-west) and Marlborough (14 miles south-east).
Around Dauntsey
In Dauntsey, that means homes near Church of St James. Nearby you’ll also find Lyneham Clack Mount (1.7 miles south). For a walk, there’s Great Wood.
When a repair is not the answer
We’ll always be straight with you, so here’s what a repair cannot fix:
- A cast iron or steel bath that is cracked right through
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Dauntsey questions
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Are there extra charges for Dauntsey?
We do not add a call-out fee. The fixed quote covers the visit and the work.
How do I book?
Some photos, your postcode and how to reach you. On the day, access to the room.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you’ll get one combined price.
How do I get a price for bath re-enamelling in Dauntsey?
Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo with your SN15 postcode.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
What happens on the day
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and get going once we have agreed what we are doing. It typically takes a full day, and you can get on with other things while we are there.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the next day.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
- Make sure the area is dry
Get a quote
Most customers in Dauntsey get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Related advice
Also near Dauntsey
Other services in Dauntsey
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
How we price bath re-enamelling
Resurfacing from £350. You will know the full cost before you book. We look at:
- Access to the area
- What kind of damage it is
- Whether we combine several jobs
- The material and finish
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Avoid suction-cup mats
- Respect the curing time we give you
- Fix dripping taps quickly
- Have chips seen to early
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
