Hertfordshire · England
Bath re-enamelling & resurfacing in Digswell, Hertfordshire
Damaged bath in Digswell? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- A dull, rough surface that won’t come clean
Bath re-enamelling in Digswell, done in place
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We regularly repair cast iron baths, Victorian roll-tops and acrylic baths, and common reasons people contact us are an outdated colour you’d like to change and an original cast iron bath that needs restoring.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Where
- Digswell (AL8, AL7, AL6)
- Region
- Hertfordshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Digswell
Digswell is about 1 mile north of Welwyn Garden City, in Hertfordshire. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. Digswell is one of 381 towns and villages in Hertfordshire we cover. Our nearest city page is London, about 23 miles away.
All of AL8, AL7 and AL6 is within our area. From Adele Avenue, Station Road and Hertford Road or anywhere nearby, we can come to you. Neighbouring places we cover include Haldens (1 mile south-east), Harmer Green (1 mile north-east), Burnham Green (2 miles north-east), Oaklands (2 miles north) and Tewin (2 miles east). Within a short drive, we also cover Watford (14 miles south-west), Hemel Hempstead (12 miles west), Stevenage (6 miles north), St Albans (7 miles south-west), Harpenden (6 miles west) and Hitchin (10 miles north).
What’s near Digswell
Around Digswell, we work in homes near Monk's Walk School, Harwood Hill Junior Mixed Infant and Nursery School and Hedgehog pub, among other places. Other local landmarks include Danesbury Park (1.5 miles north-west) and Digswell Village Church (within half a mile north). There’s a railway station in Digswell itself: Welwyn North station. Nearby you’ll also find Howard Centre (1.3 miles south) and Datchworth Museum (2.6 miles north-east). The countryside around Digswell includes Tewin Orchard and Hopkyns Wood.
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we take into account:
- Doing more than one item at once
- Unusual colours or finishes
- How many areas need work
- The type of damage
The price reflects the work involved, not where you live. You will see the full price before booking.
How to get a fixed quote
Before you send pictures, these tips help us give you a firm price:
- One picture of the entire bath
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Repairing versus replacing in Digswell
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why choose Surface Doctor in Digswell
- A fixed quote before you book
- Every repair guaranteed for a year
- No extra charge for your area
- Everything repaired in place
See our pricing and bath cost comparison.
Honest limits
Before you book, it’s worth knowing the limits:
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
- A bath that’s rusted through
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
How the visit works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a full day. We tidy up before we leave and let you know when you can use it again.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
- Tell us about any previous repairs or coatings
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
How to care for the repair
So the finish stays in good condition:
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
- Rinse off hair dye, oils and bath bombs straight away
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Towns and villages near Digswell
More services for Digswell
Common questions in Digswell
How long does re-enamelling take?
One day for most baths and can be used the day after. We will confirm timings when we quote.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Do you cover the entire of Hertfordshire?
Across the UK, and that includes Digswell. Prices do not change with location.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Digswell.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
About our accreditations · Every repair comes with a one-year guarantee.
