Somerset · England
Bath re-enamelling & resurfacing in Dinnington, Somerset
Bath re-enamelling for Dinnington, without a refit. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- An outdated colour you’d like to change
Repairing versus replacing in Dinnington
If the bath is sound, re-enamelling is typically much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Prices start from £350. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why book with us
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
- Straight answers about what a repair can do
- Nothing taken out or refitted
Read our full price list and guide to resurfacing and replacement costs.
Bath re-enamelling in Dinnington, done in place
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. We regularly repair Victorian roll-tops, basins & shower trays and acrylic baths, and the jobs we see most are thin, worn enamel in places and an outdated colour you’d like to change.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.
- Where
- Dinnington (TA17)
- Area hub
- Somerset
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- A bath that’s rusted through
- A cast iron or steel bath that is cracked right through
Send us pictures and we’ll tell you honestly.
What we work on
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Common problems we fix in Dinnington
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
You may need us if you’ve spotted:
- An outdated colour you’d like to change
- A roll-top that’s seen better days
- Chips and rust in more than one place
- Enamel that’s lost its shine and feels rough
Questions to ask before booking
- How changes to the job are handled
- Aftercare advice
- The length of the guarantee and what it covers
- How the colour is matched
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Clean with a soft cloth and mild detergent
- Don’t leave bottles, razors or sponges standing on the surface
- Fix dripping taps quickly
- Leave the bath for the full curing time before using it
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Covering Dinnington
Dinnington is about 5 miles north-east of Chard, in Somerset. We travel to homes and businesses in Dinnington and the surrounding area, so there’s no workshop to go to. Dinnington is one of 640 towns and villages in Somerset we cover.
All of TA17 is covered. Nearby, we also work in Hinton St George (1 mile east), Seavington St Mary (1 mile north), Seavington St Michael (2 miles north), Dowlish Wake (2 miles west) and Lopen (2 miles north-east). Larger places within reach include Taunton (13 miles north-west), Yeovil (9 miles east), Chard (5 miles south-west), Street (15 miles north), Crewkerne (3 miles south-east) and Somerton (11 miles north-east).
Landmarks near Dinnington
Typical jobs here are in homes near Hinton St George Church of England School, Rose and Crown Inn and Church of St Nicholas, among other places. The nearest railway station is Crewkerne station, about 4.1 miles south-east of the centre. Well-known places in the area include Crewkerne Community Hospital (3.1 miles south-east) and Crewkerne Castle (1.7 miles south-east).
Dinnington questions
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you come to Dinnington?
Yes. We work across the UK and travel to Dinnington and the rest of Somerset. Send us photos for a fixed quote, or call 0345 017 0787.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Is there any odour?
Some materials have a smell while they’re applied. It clears as the materials cure.
Do you charge for travel?
We do not add a call-out fee. Your fixed price includes everything.
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the day after.
Preparing for the visit
- Keep children and pets away from the room on the day
- Have somewhere for us to park nearby if possible
- Have a window or extractor fan available
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Read more
Nearby places to Dinnington
Also in Dinnington
Prices and what affects them
Resurfacing from £350. There is no area surcharge for Dinnington. The price reflects:
- The colour and finish to match
- What kind of damage it is
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- Details of any past repairs
- The material, if you know it
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
