Kent · England
Bath re-enamelling & resurfacing in Ditton, Kent
Bath re-enamelling for Ditton, without a refit. Send us pictures for a fixed quote, then book a visit.
- Resurfacing from £350
- Chips and rust in more than one place
- Thin, worn enamel in places
Ditton: your questions answered
Is there a guarantee?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you work in Ditton?
Yes. We cover the entire UK and travel to Ditton. Send us pictures for a fixed quote, or call 0345 017 0787.
Bath re-enamelling in Ditton, done in place
We don’t move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, with the bath ready to use the following day. We work on Victorian roll-tops, basins & shower trays and acrylic baths, and common reasons people contact us are a coloured bath you want in white and chips and rust in more than one place.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back.
- Where
- Ditton (ME20)
- Area hub
- Kent
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Ditton
More services for Ditton
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- How easy the damage is to reach
- How hard the colour is to match
- The type of damage
- Whether old repairs or coatings need taking off
The price reflects the work involved, not where you live. You’ll see the full price before you book, with no extras added later.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- A coin or ruler next to the damage for scale
- One picture of the whole bath
- The postcode, so we can plan the visit
- What it’s made of, if you know
Email us pictures of the damage and a wider shot of the entire item, and tell us you are in Ditton, and we’ll reply with a fixed price.
Ditton and the surrounding area
Ditton is about 4 miles north-west of Maidstone, in Kent. We travel to homes and businesses in Ditton and the surrounding area, so you do not need to take anything anywhere. Ditton is one of 922 places in Kent we cover. We work right across the region, from Ditton to London (about 28 miles away).
All of ME20 is covered. From London Road, Station Road and Scott Close or a nearby road, a technician can come to you. Other places close to Ditton include Aylesford (1 mile east), East Malling (1 mile west), Well Street (1 mile south-west), Allington (2 miles east) and West Malling (2 miles west). We also work in nearby towns such as Maidstone (4 miles south-east), Sittingbourne (13 miles east), Dartford (14 miles north-west), Sevenoaks (12 miles west), Royal Tunbridge Wells (14 miles south-west) and Gravesend (10 miles north).
Near you in Ditton
Locally, our jobs take us to homes close to Ditton Quarry, Ditton Infant School and Aylesford School. Other local landmarks include St Peter's Church (within half a mile west), The Malling School (1 mile west) and Kentish Quarryman pub (within half a mile north). For rail, the closest station is Aylesford station, about 0.6 miles north-east of the centre. Well-known places in the area include Leybourne Castle (1.6 miles north-west) and Fremlin Walk (3.1 miles south-east). Open spaces near Ditton include Burham Down and Blue Bell Hill.
What we do, step by step
We begin by going over the job with you, so you know exactly what we are doing. Then the area is sheeted and masked and we start. Allow most of the day, and we will keep you posted as we go.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
Get a quote
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Related advice
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Common problems we fix in Ditton
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, normally first under the taps and around the waste.
If you can see any of these, send us a photo:
- Worn patches where water runs and sits
- Chips and rust in more than one place
- Stains that will not shift
- An old resurfacing that’s failing
Questions to ask before booking
- Whether a trained technician does the job
- Whether cleaning and preparation are in the price
- What aftercare is recommended
- How the room is protected while they work
What we cannot put right
It helps to know what we can’t do:
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Work for landlords and builders
If you manage property in Ditton, we will quote for several properties at once. Just send pictures for each address and we will price them together.
We work for landlords, letting agents and housing providers in Ditton as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Keeping it looking good
To keep it looking its best for years:
- Avoid suction-cup mats
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
- Do not use the bath until it has fully cured
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
About our accreditations · Every repair comes with a one-year guarantee.
