Suffolk · England
Bath Re-enamelling for Drinkstone homes
Problem with your bath in Drinkstone? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- Thin, worn enamel in places
Bath re-enamelling in Drinkstone without replacing anything
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Whether it’s a bath that stays dull however much you clean it and wear marks under the taps, we can typically put it right, whatever the material.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Drinkstone (IP30)
- County
- Suffolk
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair isn’t the answer
A repair is not always the answer, and we will tell you before we start. We cannot fix:
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Our work in Drinkstone
Drinkstone is about 6 miles west of Stowmarket, in Suffolk. Jobs in Drinkstone are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Drinkstone is one of 731 places in Suffolk we cover. We work right across the region, from Drinkstone to London (about 64 miles away).
Our visits in IP30 are booked in the same way as anywhere else. Nearby, we also work in Drinkstone Green (1 mile south), Woolpit (1 mile north-east), Tostock (1 mile north), Hessett (1 mile west) and Beyton (2 miles north-west). Further out, we also cover Bury St Edmunds (7 miles west), Sudbury (13 miles south-west), Stowmarket (6 miles east), Hadleigh (13 miles south), Diss (15 miles north-east) and Needham Market (9 miles south-east).
Around Drinkstone
In Drinkstone, that means homes near Church of All Saints and The Bull pub and the streets around them. The closest station to Drinkstone is Elmswell station, about 2.4 miles north-east. A little further out are Haughley Castle (4.1 miles east) and Woolpit & District Museum (1 mile north-east). Not far away are Norton Wood.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Drinkstone: your questions answered
What happens once I’ve sent pictures?
You will get a fixed quote back, normally with dates to choose from. There is no obligation to book.
Do you come to Drinkstone?
Yes, we do. We send a technician to Drinkstone for every job, with no extra charge for travel.
Can I get a quote without a visit?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
How do I get a price for bath re-enamelling in Drinkstone?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your IP30 postcode.
Should you replace it?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing renews the entire surface without moving it. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Drinkstone clients choose us
- Work done at your home or business
- Accredited with CHAS, Constructionline and SafeContractor
- A fixed quote before booking
- No extra charge for your area
Read our full price list or resurfacing vs replacement cost guide.
Common problems we fix in Drinkstone
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, usually first under the taps and around the waste.
Customers typically contact us about:
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
- A coloured bath you want in white
- An old resurfacing that’s failing
What to look for in a quote
- Whether they match the colour on site
- What prep work is covered
- How soon you can use it again
- Aftercare advice
Also near Drinkstone
Other services in Drinkstone
Landlords, agents and businesses in Drinkstone
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
How it works
Arrival times are agreed in advance, so you know when to expect us. On site, it takes most of the day for most jobs. The room is left tidy and ready to use once it has cured.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can typically be used the day after.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Read more
What bath re-enamelling costs
Prices start from £350. We give every job a fixed quote from photos. These are the things that affect it:
- What the surface is made of
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- Your postcode, so we can check dates
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
- Details of any past repairs
Most customers in Drinkstone get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
About our accreditations · Every repair comes with a one-year guarantee.
