Dumfries and Galloway · Scotland
Bath Re-enamelling in Drummore
Fixed-price bath re-enamelling in Drummore and the surrounding area, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- Wear marks under the taps
- A dull, rough surface that will not come clean
Bath re-enamelling in Drummore, done in place
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Typical jobs include several chips and rust patches and staining under the taps and around the waste, in basins & shower trays, cast iron baths and acrylic baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Drummore (DG9)
- County
- Dumfries and Galloway
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Drummore and the surrounding area
Drummore is about 16 miles south of Stranraer, in Dumfries and Galloway. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Drummore is one of 138 places in Dumfries and Galloway we cover.
Jobs in DG9 work the same way as everywhere else we cover. From Harbour Terrace, Harbour Road and Ward Place or a nearby road, we can come to you. If you’re just outside Drummore, we cover Port Logan (3 miles north-west), Ardwell (6 miles north), Sandhead (9 miles north), Stoneykirk (11 miles north) and Dunragit (13 miles north).
Landmarks near Drummore
Our clients here include homes close to Old Parish Church and Burial-Ground and the streets around them. Other landmarks nearby include Castle Balzieland (4.5 miles north-west). The countryside around Drummore includes Dunman.
How it works
Arrival times are agreed in advance. On site, it takes most of the day. We leave the room clean.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
Drummore questions
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Do you charge for travel?
We do not add a call-out fee. Your fixed quote includes everything.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How to look after the repair
Looking after the surface is easy:
- Wash away dyes and oils after use
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Honest limits
We’ll always be straight with you, so here’s what a repair cannot fix:
- Steel that has corroded right through
- Problems we can’t see until an old finish comes off
- Plumbing leaks, which need a plumber
Send us pictures and we’ll tell you honestly.
Materials we work on in Drummore
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. The price reflects the work involved, not where you live. You’ll see the full price before booking.
What you get with us
- Same prices wherever you are
- Most jobs done in one visit
- We leave the room as we found it
- We’ll tell you if it’s not worth repairing
Take a look at our prices page or resurfacing vs replacement cost guide.
What bath re-enamelling costs
Resurfacing from £350. You will know the full cost before booking. We take into account:
- The material
- The colour and finish to match
- How many items we do on one visit
- The type of damage
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from pictures
It only takes a minute to photograph the damage. Try to send:
- Something in shot to show the size
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- Any details about the material
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Signs you need bath re-enamelling in Drummore
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Typical reasons for a call-out include:
- Enamel that’s lost its shine and feels rough
- A coloured bath you want in white
- A peeling or bubbling previous coating
- Brown or grey marks that do not clean off
What to look for in a quote
- Whether the price covers travel
- The length of the guarantee and what it covers
- What happens if the damage is worse than the photos show
- How the colour is matched
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Places near Drummore
What else we do in Drummore
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
