Kent · England
Bath re-enamelling & resurfacing in Dunkirk, Kent
Damaged bath in Dunkirk? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Wear marks under the taps
About our bath re-enamelling in Dunkirk
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the day after. We work on acrylic baths, basins & shower trays and pressed steel baths, and the jobs we see most are enamel that’s lost its shine and feels rough and an original cast iron bath that needs restoring.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Area
- Dunkirk (ME13)
- Area hub
- Kent
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Dunkirk: your questions answered
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
What happens if you find more damage?
Your quote covers the damage in the photos. If there’s more, we will tell you before starting.
How durable is a resurfaced bath?
Look after it and it lasts. Gentle cleaning, no suction mats.
Can you fix a peeling bath coating?
Typically, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
What happens after I send pictures?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Repairs by material
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Aftercare tips
Most damage we see is avoidable. A few tips:
- Wash away dyes and oils after use
- Get any chip repaired quickly
- Wipe the bath dry after use in hard water areas
- Leave the bath for the full curing time before using it
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Towns and villages near Dunkirk
Other services in Dunkirk
Signs you need bath re-enamelling in Dunkirk
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
The things customers generally mention when they call include:
- Brown or grey marks that don’t clean off
- A dull, rough surface that will not come clean
- A bath in a colour that no longer suits
- Wear marks under the taps
What to look for in a quote
- Is the price fixed, and does it include VAT?
- What prep work is covered
- What protection goes down before work starts
- How soon you can use it again
What a repair cannot fix
A repair is not right for every job, for example:
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
- Leaks from fittings rather than the bath
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Dunkirk
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
How we price bath re-enamelling
Resurfacing from £350. We price every job individually, from your pictures. The main factors are:
- The material and finish
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- Access to the area
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what to send:
- One picture of the entire bath
- Natural light rather than flash
- Details of any past repairs
- Your postcode, so we can check dates
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
How the visit works
Arrival times are agreed in advance, so you know when to expect us. On site, it takes the best part of a day. The room is left tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Make sure the area is dry
- Have somewhere for us to park nearby if possible
- Tell us about parking, stairs or access
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Repairing versus replacing in Dunkirk
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the entire surface with the bath left where it is. Prices start from £350. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- Dust sheets down, tidy finish
- Colour mixed on the day to match
- Same prices wherever you are
- Typically one visit, start to finish
Take a look at our pricing and resurfacing vs replacement cost guide.
Our work in Dunkirk
Dunkirk is about 4 miles south-east of Faversham, in Kent. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Dunkirk is one of 922 places in Kent we cover. Our nearest city page is London, about 48 miles away.
Postcode districts we cover here: ME13. You’ll find streets such as London Road and Courtenay Road. If you are just outside Dunkirk, we cover Boughton under Blean (1 mile west), Winterbourne (1 mile south-west), Hickmans Green (1 mile west), Oversland (1 mile south-west) and South Street (2 miles south-west). Further out, we also cover Ashford (12 miles south-west), Canterbury (5 miles east), Sittingbourne (11 miles west), Whitstable (5 miles north-east), Faversham (4 miles north-west) and Herne Bay (9 miles north-east).
Landmarks near Dunkirk
Typical jobs here are in homes near Christ Church, The Red Lion pub and Mount Ephraim Gardens, among other places. For rail, the closest station is Selling station, about 1.9 miles south-west. Further afield, we also cover the area around Chilham Castle (3.5 miles south) and Eastbridge Hospital of St Thomas the Martyr (4.4 miles east). For a walk, there is Blean Woods RSPB Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
