Norfolk · England
Bath re-enamelling & resurfacing in Dunston, Norfolk
Full bath re-enamelling and resurfacing in Dunston, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
For landlords and businesses
We’re used to working with agents and managing companies. Just send photos, the address and how to get access.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Bath re-enamelling at your home in Dunston
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Our technicians work on basins & shower trays, pressed steel baths and acrylic baths, and common reasons people contact us are brown or grey marks that don’t clean off and a bath that stays dull however much you clean it.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Dunston (NR14)
- Region
- Norfolk
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How to care for the repair
Looking after the surface is easy:
- Rinse off hair dye, oils and bath bombs immediately
- Get any chip repaired quickly
- Keep suction mats out of the bath
- Clean with a soft cloth and mild detergent
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What a repair can’t fix
We’ll always be straight with you, so here’s what a repair will not do:
- A cast iron or steel bath that’s cracked right through
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Our work in Dunston
Dunston is about 3 miles south of Lakenham, in Norfolk. We visit homes and businesses in Dunston and the surrounding area, so nothing has to leave your home. Dunston is one of 797 places in Norfolk where we work.
All of NR14 is covered, from the main roads to the quietest streets. We also travel to Stoke Holy Cross (1 mile south-east), Caistor St Edmund (1 mile north-east), Swainsthorpe (1 mile south-west), Keswick (1 mile north-west) and Swardeston (1 mile west). Larger places within reach include Norwich (4 miles north), Wymondham (7 miles west), Sprowston (6 miles north), Thorpe St Andrew (5 miles north-east), Attleborough (12 miles west) and Norwich Lanes (4 miles north).
Landmarks near Dunston
Locally, our jobs take us to homes close to Stoke Holy Cross Primary School, University Technical College Norfolk and Dunston Common, among other places. The nearest railway station is Norwich station, roughly 3.6 miles north. Further afield, we also cover the area around Chantry Place (3.4 miles north) and Norfolk and Norwich Hospital (3.2 miles north). The countryside around Dunston includes Hethel Old Thorn.
Questions from Dunston
Do the materials smell?
There can be some smell while we work. It clears as the materials cure.
Do you cover Dunston?
Yes. We cover the whole UK and come to Dunston. Send us pictures for a fixed quote, or call 0345 017 0787.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Norfolk.
How much does bath re-enamelling cost in Dunston?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Also near Dunston
What else we do in Dunston
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before booking.
Why book with us
- Honest advice, even when it means no job
- Everything repaired in place
- Fixed prices from your photos
- Work done at your home or business
Read our pricing and guide to resurfacing and replacement costs.
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What we do, step by step
We work cleanly and quietly. Protection goes down first, then the job itself takes a full day. Before we leave, we explain how soon it can be used and how to look after it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the following day.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Make sure the room can be ventilated
- Tell us about any previous repairs or coatings
Getting a price
Upload photos of the damage and one of the entire item, and tell us you are in Dunston, and we’ll reply with a fixed quote.
Advice
What affects the price in Dunston
Prices start from £350. We price every job individually, from your photos. The main factors are:
- How many items we do on one visit
- Access to the area
- The material
- Previous DIY repairs that have to come out
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send photos for a quote
You can take the pictures on your phone. Make sure they show:
- A clear, close picture of the problem area
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
