Northamptonshire · England
Bath Re-enamelling in Earls Barton
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Earls Barton. Send photos for a free, fixed quote.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
How we handle bath re-enamelling in Earls Barton
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. Common call-outs are for stains that won’t shift and thin, worn enamel in places, in Victorian roll-tops, pressed steel baths and basins & shower trays.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Earls Barton (NN6)
- Region
- Northamptonshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair can’t fix
A repair isn’t right for every job, for example:
- A cast iron or steel bath that’s cracked right through
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
When to call us in Earls Barton
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Common reasons people in Earls Barton contact us include:
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
- A coloured bath you want in white
- An original cast iron bath that needs restoring
Comparing quotes
- A fixed quote, and whether VAT is included
- How soon you can use it again
- Whether there are any call-out or travel charges
- What prep work is covered
Repair or replace in Earls Barton?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Colour mixed on the day to match
- Repair technicians who travel to you, UK-wide
- Same prices wherever you are
- One visit for most repairs
See our full price list and bath cost comparison.
How to look after the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Don’t let dyes or oils sit on the finish
- Keep suction mats out of the bath
- Clean with a soft cloth and mild detergent
- Respect the curing time we give you
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Nearby places to Earls Barton
More services for Earls Barton
Common questions in Earls Barton
What happens once I’ve sent photos?
You’ll get a fixed quote back. There’s no obligation to book.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
How do I book?
Some photos, your postcode and how to reach you. On the day, access to the room.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
How much does bath re-enamelling cost in Earls Barton?
Resurfacing from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Where we work around Earls Barton
Earls Barton is about 3 miles south-west of Wellingborough, in Northamptonshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Earls Barton is one of 364 towns and villages in Northamptonshire where we work. Our nearest city page is Birmingham, about 50 miles away.
Jobs in NN6 work the same way as everywhere else we cover. From High Street, Harcourt Square and Station Road or anywhere nearby, a technician can come to you. Other places close to Earls Barton include Ecton (2 miles west), Wilby (2 miles north-east), Great Doddington (2 miles east), Mears Ashby (2 miles north-west) and Whiston (2 miles south). Further out, we also cover Northampton (6 miles west), Corby (15 miles north), Kettering (9 miles north), Wellingborough (3 miles north-east), Rushden (7 miles east) and Towcester (14 miles south-west).
Landmarks near Earls Barton
Locally, our jobs take us to homes close to Earls Barton Primary School, All Saints' Church and Stags Head Public House. The nearest railway station is Wellingborough station, about 4.1 miles north-east of the centre. Nearby you will also find Castle Ashby House (3 miles south) and St Andrew's Hospital (5.5 miles west). For a walk, there is Lings Wood Nature Reserve and Swanspool Lake.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We clean up when we’re done and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Make sure the room can be ventilated
- Let us know about parking or access
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
