Kent · England
Bath re-enamelling & resurfacing in East End, Kent
Bath re-enamelling in and around East End: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- An old resurfacing that is failing
Keeping it looking good
To keep it looking its best:
- Never use suction bath mats
- Dry the bath after use to stop limescale
- Respect the curing time we give you
- Have chips seen to early
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Bath re-enamelling in East End, done in place
We do not move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the day after. Typical jobs include wear marks under the taps and a dull, rough surface that won’t come clean, on Victorian roll-tops, acrylic baths and cast iron baths.
Every repair is covered by a one-year guarantee, wherever you are in Kent.
- Where
- East End (TN17)
- Area hub
- Kent
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to East End
Also in East End
Landlord and trade work in East End
We work for landlords, letting agents and housing providers in East End as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Common problems we fix in East End
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Common reasons people in East End contact us include:
- Chips and rust in more than one place
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- Brown or grey marks that don’t clean off
Comparing quotes
- Whether they match the colour on site
- Aftercare advice
- If travel is included in the price
- What preparation is included
Covering East End
East End is about 11 miles west of Ashford, in Kent. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. East End is one of 922 towns and villages in Kent we cover. We work right across the region, from East End to London (42 miles away).
Jobs in TN17 are booked in the same way as anywhere else. From Wood Lane, Mockbeggar Lane and Jackson Way or anywhere nearby, a technician can come to you. Neighbouring places we cover include Fosten Green (1 mile north), Clapper Hill (1 mile north-east), Parkgate (1 mile east), West Cross (2 miles south) and Strood (2 miles south-east). We also work in nearby towns such as Maidstone (13 miles north), Ashford (11 miles east), Foley Park (14 miles north), Paddock Wood (12 miles north-west), Tenterden (3 miles east) and Bearsted (13 miles north).
What’s near East End
We visit homes around St Margaret's Church, among other places. A little further out are Sissinghurst Castle (2.5 miles north-west) and Benenden Hospital (under half a mile south).
East End: your questions answered
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
What do you need from me?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Can you quote from photos?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
How long will the bath be out of use?
Typically one day, with the bath ready the following day. A badly pitted bath can need a second day.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your photos and you’ll get one combined price.
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes the best part of a day. If anything looks different from your photos, we’ll talk to you before going ahead.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Clear the area around the damage
- Open a window if you can
- Let us know about parking or access
Getting a price
Email us a picture of the damage and a wider shot of the entire item, and tell us you are in East End, and we will come back with a fixed quote.
Advice
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we look at:
- Previous DIY repairs that have to come out
- Doing more than one item at once
- Access to the area
- What the surface is made of
We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- A clear, close picture of the problem area
- Where you are, by postcode
- Whether it’s been repaired or coated before
- Any details about the material
If you’re in East End and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
When we’d advise against a repair
Some jobs aren’t right for a repair, for example:
- A cast iron or steel bath that’s cracked right through
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Should you replace it?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with no extras added later.
Why book with us
- A fixed quote before you book
- No extra charge for your area
- Colour mixed on the day to match
- We leave the room as we found it
Take a look at our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
