Kent · England
Bath re-enamelling & resurfacing in Eastwood, Kent
Bath re-enamelling for Eastwood, without a refit. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we take into account:
- The size and number of damaged areas
- What the surface is made of
- How many items we do on one visit
- Unusual colours or finishes
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A wider photo showing the whole bath
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Bath re-enamelling at your home in Eastwood
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We work on Victorian roll-tops, cast iron baths and basins & shower trays, and the jobs we see most are enamel that’s lost its shine and feels rough and an old resurfacing that’s failing.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Eastwood (ME17)
- Region
- Kent
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Also near Eastwood
Other services in Eastwood
What we are called out for in Eastwood
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
You may need us if you’ve spotted any of these:
- Staining under the taps and around the waste
- Thin, worn enamel in places
- Lots of chips and rust spots
- A coloured bath you want in white
Comparing quotes
- How the colour is matched
- When it can be used again
- Whether the price is fixed and includes VAT
- How to look after the finish
What we do, step by step
You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take a full day, and you’re welcome to carry on with your day while we work.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the next day.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Make sure the room can be ventilated
- Tell us about parking, stairs or access
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Advice
Where we work around Eastwood
Eastwood is about 7 miles south-east of Maidstone, in Kent. Wherever you are in the ME17 postcode area, we carry out the work at your property. Eastwood is one of 922 places in Kent where we work. We work right across the region, from Eastwood to London (38 miles away).
All of ME17 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Broadstone (1 mile south-east), Grafty Green (1 mile east), Ulcombe (1 mile north-west), Fairbourne Heath (1 mile north) and Liverton Street (1 mile north-east). We also work in nearby towns such as Maidstone (7 miles north-west), Ashford (10 miles south-east), Sittingbourne (10 miles north), Faversham (12 miles north-east), Kings Hill (12 miles north-west) and Davington (12 miles north-east).
Around Eastwood
Around Eastwood, we work in homes near Ulcombe Church of England Primary School and The Provender Public House, among other places. The nearest railway station is Harrietsham station, roughly 2.8 miles north. Other landmarks nearby include The Dog Collar Museum (3.2 miles north-west) and Coldbridge Castle (1.6 miles east).
Why repair rather than replace?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why us?
- Typically one visit, start to finish
- Dust sheets down, tidy finish
- CHAS and Constructionline accredited
- We come to you, anywhere in the UK
Read our full price list or bath cost comparison.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
For landlords and businesses
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What a repair cannot fix
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we will tell you honestly.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Common questions in Eastwood
Will the price change on the day?
Your quote covers the damage in the pictures. If there’s more, we will tell you before starting.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you quote from photos?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
What happens after I send photos?
You will get a fixed quote back, typically with dates to choose from. There is no obligation to book.
Do you cover the entire of Kent?
The entire UK, including all of Kent. Send your postcode with your photos and we’ll offer you dates.
About our accreditations · Every repair comes with a one-year guarantee.
