County Durham · England
Bath re-enamelling & resurfacing in Ebchester, County Durham
Full bath re-enamelling and resurfacing in Ebchester, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A roll-top that is seen better days
- An outdated colour you’d like to change
Landlord and trade work in Ebchester
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We regularly work with letting and managing agents. Send the address, photos and access details.
About our bath re-enamelling in Ebchester
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. If you are dealing with chips and rust in more than one place and brown or grey marks that don’t clean off, we can help.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Ebchester (DH8)
- Area hub
- County Durham
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why Ebchester clients choose us
- Colour mixed on the day to match
- CHAS, Constructionline and SafeContractor accredited
- Same prices wherever you are
- We’ll tell you if it’s not worth repairing
See our full price list or resurfacing vs replacement cost guide.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What we can’t put right
We’ll always be straight with you, so here’s what a repair will not do:
- A cast iron or steel bath that’s cracked right through
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Aftercare tips
Aftercare is simple:
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
- A quick wipe after use keeps limescale away
- Keep suction mats out of the bath
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
The process
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
- Ensure the area is dry
Getting a price
Most customers in Ebchester get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Ebchester and nearby
Ebchester is about 3 miles north of Consett, in County Durham. We travel to clients in Ebchester, so you don’t need to take anything anywhere. Ebchester is one of 329 places in County Durham we cover. You can also see our page for Newcastle upon Tyne, about 10 miles away.
Every address in DH8 is within our area, from the main roads to the quietest streets. That includes homes on Rectory Lane, Front Street and Chare Bank. If you’re just outside Ebchester, we cover Broom Hill (1 mile south-east), East Law (1 mile south), Newlands (1 mile west), High Westwood (1 mile east) and Medomsley Edge (1 mile south-east). Larger places within reach include Durham (13 miles south-east), Consett (3 miles south), Chester-le-Street (11 miles east), Stanley (6 miles east), Crook (13 miles south) and Birtley (11 miles east).
Landmarks near Ebchester
In Ebchester, that means homes near Derwent Walk Inn, Ebchester CofE Primary School and Church of St Ebba. The nearest railway station is Stocksfield station, roughly 4.8 miles north-west of the centre. A little further out are Shotley Bridge Hospital (1.7 miles south) and Prudhoe Castle (5 miles north). Open spaces near Ebchester include Currock Hill.
Ebchester questions
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Will the price change on the day?
Your quote covers the damage in the photos. If there is more, we will tell you before starting.
Do you resurface freestanding baths?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and you’ll get one combined price.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Do the materials smell?
Expect a mild smell while we’re working, which fades afterwards.
Places near Ebchester
Other services in Ebchester
What affects the price in Ebchester
Prices start from £350. You won’t pay by the hour. The price depends on:
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- Access to the area
- The material and finish
A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with no extras added later.
How to get a fixed quote
You can take the pictures on your phone. Just make sure we can see:
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- Any details about the material
For a price in Ebchester, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
About our accreditations · Every repair comes with a one-year guarantee.
