Rhondda Cynon Taff · Wales

Bath Re-enamelling for Edmondstown homes

Full bath re-enamelling and resurfacing in Edmondstown, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • An original cast iron bath that needs restoring
  • A bath in a colour that no longer suits
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Edmondstown

Bath re-enamelling at your home in Edmondstown

We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. Whether it’s an original cast iron bath that needs restoring and thin, worn enamel in places, we can help, on cast iron baths, Victorian roll-tops and pressed steel baths alike.

The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.

Before and after: an old basin refinished to bright white
Area
Edmondstown (CF40, CF39)
Region
Rhondda Cynon Taff
Guarantee
One year on every repair
Quote
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026

How to care for the repair

Much of the damage we repair could have been avoided. A few tips:

  • Keep toiletries on a shelf rather than in the bath
  • Respect the curing time we give you
  • Fix dripping taps quickly
  • Dry the bath after use to stop limescale

The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.

If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

The process

Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take most of the day, and the room is left clean and tidy.

  1. The room is masked, protected and ventilated.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. Once cured, normally by the next day, the bath is ready.

How to prepare

  • Move bottles, mats and clutter away from the area
  • Tell us if there are stairs or a lift
  • Plan for the room to be out of bounds to pets and children

Ask for a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.

Get a fixed quote

Advice

Do you need bath re-enamelling in Edmondstown?

Hard water speeds up the wear, and gritty cleaners are the worst culprits.

Typical reasons for a call-out include:

  • A period or roll-top bath worth keeping
  • Staining under the taps and around the waste
  • Lots of chips and rust spots
  • A dull, rough surface that will not come clean

Before booking anyone

  • Whether cleaning and preparation are in the price
  • Whether there are any call-out or travel charges
  • Whether the colour is mixed to match
  • What happens if the damage is worse than the pictures show

Our hiring checklist

Our work in Edmondstown

Edmondstown is about 1 mile south-east of Tonypandy, in Rhondda Cynon Taff. From the centre of Edmondstown to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Edmondstown is one of 133 towns and villages in Rhondda Cynon Taff where we work.

We work across the CF40 and CF39 postcode area and the streets around it. That includes homes on Church Road, Oakdale Road and Ashdale Road. We also travel to Penrhiwfer (1 mile west), Williamstown (1 mile north-west), Trebanog (1 mile east), Penygraig (1 mile north-west) and Tonypandy (1 mile north-west). Further out, we also cover Aberdare (8 miles north), Pontypridd (4 miles east), Mountain Ash (6 miles north-east), Rhondda (4 miles north-west), Church Village (6 miles south-east) and Mountain Ash East (6 miles north-east).

Near you in Edmondstown

Around Edmondstown, we work in homes near Ysgol Gyfun Cwm Rhondda, Church of St John and Ysgol Gyfun Cwm Rhondda and the streets around them. You’ll also find Williamstown Primary School (under half a mile west) and Black Diamond Hotel (less than half a mile south-east). For rail, the closest station is Dinas Rhondda station, about 0.9 miles north. Other landmarks nearby include Rhondda (2.5 miles north-west) and Llantrisant Castle (5 miles south-east). For a walk, there is Mynydd Dinas and Ferndale Lake.

Map of Edmondstown © OpenStreetMap contributors

When a repair isn’t the answer

Some problems need a builder, plumber or fitter rather than us:

  • Holes rusted through the metal
  • Leaks from fittings rather than the bath
  • Anything hidden under an old coating, until we remove it

If in doubt, send pictures and we’ll say what we think.

Materials we work on in Edmondstown

  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays

For landlords and businesses

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.

Can I fix it myself?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

Edmondstown: your questions answered

How soon can you come?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Will there be a smell?

There may be a mild smell during the work.

Can pets and children be at home?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

Will the price change on the day?

We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

Which areas do you work in?

Everywhere in the UK, Edmondstown included. Travel is included in the price.

Will the bath be moved?

No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.

Can you do the outside of a roll-top?

Yes, often. We resurface the inside, and the outside can be refinished too.

Is the work guaranteed?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

What your bath is made of matters

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Cast iron

Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.

Should you replace it?

Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing typically wins. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, with no extra for Edmondstown. The job itself decides the price: the material, the amount of damage and how many items.

Why us?

  • Nothing taken out or refitted
  • Technicians who travel to you, UK-wide
  • A fixed quote before you book
  • Colour-matched on site

See our full price list or resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.