Surrey · England
Bath Re-enamelling for Effingham homes
Full bath re-enamelling and resurfacing in Effingham, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A roll-top that’s seen better days
Bath re-enamelling at your home in Effingham
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. Typical jobs include an original cast iron bath that needs restoring and a bath in a colour that no longer suits, in cast iron baths, acrylic baths and basins & shower trays.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Effingham (KT24)
- Area hub
- Surrey
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Simple care helps the repair last. Our advice:
- Keep suction mats out of the bath
- Wash away dyes and oils after use
- Respect the curing time we give you
- Do not leave a chip unrepaired
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Nearby places to Effingham
What else we do in Effingham
Honest limits
A few problems are outside what a surface repair can do:
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
The process
Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. Most visits take most of the day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
- Keep pets and children out of the room while we work
Ask for a price
Upload a picture of the damage and a wider shot of the whole item, and tell us you are in Effingham, and we’ll reply with a fixed quote.
Related advice
Common questions in Effingham
Can you repair something that’s been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
How long does re-enamelling take?
Typically one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Is a repair better than a new one?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Can you quote from pictures?
Generally, yes. Clear photos let us give you a fixed quote without visiting.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Do you resurface freestanding baths?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Covering Effingham
Effingham is about 4 miles south-west of Leatherhead, in Surrey. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Effingham is one of 395 places in Surrey we cover. Our jobs stretch from Effingham to London (about 21 miles away).
Our technicians cover all of KT24 and the streets around it. Local streets include The Street, Crossways and Church Street, and we cover them all. Close by, we cover East Horsley (1 mile west), West Horsley (2 miles west), Ockham (3 miles north-west), East Clandon (4 miles west) and Abinger Hammer (4 miles south). We also work in nearby towns such as Guildford (8 miles west), Woking (8 miles north-west), Camberley (15 miles west), Epsom (7 miles north-east), Horley (12 miles south-east) and Redhill (10 miles east).
Local landmarks in Effingham
Locally, our jobs take us to homes close to Church of St Lawrence, The Queen Stage pub and The Forest and the Highlands, among other places. Nearby too are St Lawrence Primary School (less than half a mile north-west), Howard of Effingham School (under half a mile north-east) and Manor House School (under half a mile north-east). Effingham’s nearest station is Bookham station, roughly 1.5 miles north-east of the centre. Other landmarks nearby include Abinger Castle (4.7 miles south) and Headley Court (5.5 miles east). Green spaces nearby include Combe Bottom and Box Hill.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Common problems we fix in Effingham
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
These are the problems we’re asked about most:
- A coating lifting around the plughole
- A bath in a colour that no longer suits
- Thin, worn enamel in places
- A dull, rough surface that will not come clean
Before booking anyone
- What protection goes down before work starts
- What the guarantee covers, and for how long
- Who will actually do the work
- What aftercare is recommended
Prices and what affects them
Prices start from £350. You’ll know the full cost before booking. We take into account:
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- What kind of damage it is
- The colour and finish to match
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
How to get a fixed price
Photographing the damage takes a minute. Please include:
- The postcode, so we can plan the visit
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- Natural light rather than flash
To get a price, send two or three photos using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not where you live. You will see the full price before you book, with no extras added later.
Why choose Surface Doctor in Effingham
- Accredited with CHAS, Constructionline and SafeContractor
- Everything repaired in place
- One visit for most repairs
- We come to you, anywhere in the UK
Take a look at our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
