Highland · Scotland
Bath re-enamelling & resurfacing in Evanton, Highland
Damaged bath in Evanton? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Stains that will not shift
Bath re-enamelling in Evanton, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. We’re frequently asked to fix a period or roll-top bath worth keeping and thin, worn enamel in places, on cast iron baths, Victorian roll-tops and acrylic baths.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.
- Location
- Evanton (IV16)
- Area hub
- Highland
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Evanton
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
Landlords, letting agents and housing providers in Evanton use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
How we price bath re-enamelling
Resurfacing from £350. You won’t pay by the hour. The price depends on:
- Access to the area
- The size and number of damaged areas
- The material and finish
- What kind of damage it is
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
Phone pictures are fine, there’s no need for anything special. Just make sure we can see:
- A close-up of the damage, in focus
- One picture of the whole bath
- Natural light rather than flash
- Your postcode, so we can check dates
Most customers in Evanton get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Our work in Evanton
Evanton (Gaelic: Baile-Eoghain) is about 14 miles north of Inverness, in Highland. Our repair technicians come to clients in Evanton and the surrounding area, so nothing has to leave your home. We cover 253 places across Highland.
Every address in IV16 is covered. You’ll find streets such as Station Road, Camden Street and Balconie Street, all of which we cover. Other places close to Evanton include Cullicudden (3 miles south-east), Alness (4 miles north-east), Dalmore (4 miles north-east), Culbokie (4 miles south) and Dingwall (5 miles south-west). Further out, we also cover Inverness (14 miles south), Cradlehall (15 miles south-east), Tain (14 miles north-east), Merkinch (13 miles south), Hilton (15 miles south) and Crown (14 miles south). Some remote addresses need extra planning, so call us to arrange it.
Local landmarks in Evanton
Around Evanton, we work in homes near Evanton. Evanton’s nearest station is Alness station, about 3.9 miles north-east. Other landmarks nearby include Balconie Castle (0.6 miles south-east) and Ross Memorial Hospital (5.6 miles south-west). The countryside around Evanton includes Cnoc Fyrish.
Towns and villages near Evanton
What else we do in Evanton
Evanton: your questions answered
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Do the materials smell?
Expect a mild smell while we are working, which fades afterwards.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day, with the bath back in use the next day. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking.
Why Evanton customers choose us
- No need to remove anything
- CHAS, Constructionline and SafeContractor accredited
- Honest advice, even when it means no job
- Technicians who travel to you, UK-wide
Read our full price list or bath cost comparison.
Aftercare tips
Once the work has cured, treat it gently:
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
- Stick to gentle, non-abrasive cleaners
- A dripping tap should be fixed promptly
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Honest limits
A repair isn’t right for every job, including:
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
Send us pictures and we will tell you honestly before you book.
Materials we work on in Evanton
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
What happens on the day
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job typically takes most of the day. We tidy up before we leave and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
- Have somewhere for us to park nearby if possible
Getting a price
If you’re in Evanton and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Do you need bath re-enamelling in Evanton?
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
The things clients typically mention when they call are:
- Enamel that’s lost its shine and feels rough
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
What your quote should include
- Whether the price covers travel
- The length of the guarantee and what it covers
- How long it needs to cure
- How changes to the job are handled
About our accreditations · Every repair comes with a one-year guarantee.
