Lancashire · England
Bath re-enamelling & resurfacing in Ewood Bridge, Lancashire
Damaged bath in Ewood Bridge? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- Chips and rust in more than one place
How it works
We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take the best part of a day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Advice
Bath re-enamelling at your home in Ewood Bridge
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s several chips and rust patches and an original cast iron bath that needs restoring, we can help.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Ewood Bridge (BB4)
- Region
- Lancashire
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Ewood Bridge
Other services in Ewood Bridge
When we’d advise against a repair
Before booking, it’s worth knowing the limits too:
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
Send us photos and we’ll tell you honestly before you book.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Aftercare tips
To keep it looking its best for years:
- Rinse off hair dye, oils and bath bombs immediately
- Clean with a soft cloth and mild detergent
- Have chips seen to early
- Keep suction mats out of the bath
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
About Ewood Bridge
Ewood Bridge is about 1 mile south-east of Haslingden, in Lancashire. Whether you are in the middle of Ewood Bridge or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 482 towns and villages in Lancashire, from the larger towns to small villages. We work right across the region, from Ewood Bridge to Manchester (15 miles away).
All of BB4 is covered, from the main roads to the quietest streets. Local streets include Lindon Park Road, Hilltop Drive and Manchester Road. If you are just outside Ewood Bridge, we cover Bent Gate (1 mile south), Irwell Vale (1 mile south), Helmshore (1 mile west), Edenfield (1 mile south) and Strongstry (1 mile south). Larger places within reach include Burnley (8 miles north), Chorley (13 miles west), Bamber Bridge (15 miles west), Accrington (5 miles north-west), Nelson (11 miles north) and Colne (13 miles north-east).
Landmarks near Ewood Bridge
Our clients here include homes close to Haslingden High School, The Woolpack Inn and Haslingden Broadway Primary School, among other places. Ewood Bridge’s nearest station is Entwistle station, roughly 4.7 miles south-west of the centre. Nearby you will also find Rossendale General Hospital (0.8 miles north) and Helmshore Mills Textile Museum (Higher Mill) (1.1 miles west). For a walk, there’s Hail Storm Hill.
Landlords, agents and businesses in Ewood Bridge
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
For anyone letting property in or around Ewood Bridge, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
What we’re called out for in Ewood Bridge
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Clients typically contact us about:
- Several chips and rust patches
- A dull, rough surface that won’t come clean
- Stains that will not shift
- A period or roll-top bath worth keeping
What your quote should include
- What happens if they find more damage
- Whether the price covers travel
- When it can be used again
- Whether the price is fixed and includes VAT
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- How much damage there is
- Doing more than one item at once
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
Our prices are the same across the UK, so there’s no premium for Ewood Bridge. What changes the price is the job itself: the material, the amount of damage and how many items.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what we need:
- A picture taken from further back
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- Natural light rather than flash
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Your questions about bath re-enamelling in Ewood Bridge
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Which areas do you work in?
We cover the whole UK, including Ewood Bridge and the rest of Lancashire. Just include your postcode and we will offer you dates.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Do you come to Ewood Bridge?
We do. Technicians travel to Ewood Bridge from across the region, with no extra charge for travel.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
About our accreditations · Every repair comes with a one-year guarantee.
