Devon · England
Bath re-enamelling & resurfacing in Exton, Devon
Bath re-enamelling in and around Exton: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Stains that won’t shift
- A bath that stays dull however much you clean it
Bath re-enamelling at your home in Exton
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Our repair technicians work on acrylic baths, pressed steel baths and basins & shower trays, and common reasons people contact us are a peeling or bubbling previous coating and lots of chips and rust spots.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Exton (EX3)
- Area hub
- Devon
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. There is no charge for travel to Exton. The price depends on:
- The type of damage
- Where the damage is and how we get to it
- The colour and finish to match
- How many items we do on one visit
We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
Before you send photos, these tips help us give you a firm price:
- Details of any past repairs
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Do you need bath re-enamelling in Exton?
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Common reasons people in Exton contact us include:
- Staining under the taps and around the waste
- Worn patches where water runs and sits
- Chips and rust in more than one place
- A roll-top that is seen better days
Before you book anyone
- How your room will be protected
- A fixed quote, and whether VAT is included
- What preparation is included
- If travel is included in the price
What we do, step by step
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a full day in most cases. The room is left tidy and ready to use once it has cured.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the day after.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
- Keep a parking space free if you can
Get a quote
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
Covering Exton
Exton is about 3 miles north-west of Exmouth, in Devon. Our repair technicians come to homes and businesses in Exton and nearby villages, so there’s no workshop to go to. Exton is one of 586 places in Devon we cover.
We work across the EX3 postcode area. That includes homes on Station Road, Barton Close and Exmouth Road. Being close to the A376, Exton is easy for our technicians to reach. If you are just outside Exton, we cover Ebford (1 mile north), Clyst St George (1 mile north), Lympstone (2 miles south-east), Powderham (2 miles south-west) and Topsham (2 miles north-west). Within a short drive, we also cover Exeter (5 miles north-west), Exmouth (3 miles south-east), Newton Abbot (12 miles south-west), Teignmouth (8 miles south), Sidmouth (9 miles east) and Honiton (14 miles north-east).
Landmarks near Exton
In Exton, that means homes near Puffing Billy pub and Saint Andrew's Church and the streets around them. There is a railway station in Exton itself: Exton station. Well-known places in the area include Powderham Castle (2 miles south-west) and Topsham Museum (1.2 miles north-west). Open spaces near Exton include Bowling Green Marsh RSPB reserve.
Keeping it looking good
Simple care helps the repair last. We recommend:
- A quick wipe after use keeps limescale away
- Clean with a soft cloth and mild detergent
- Do not use the bath until it has fully cured
- Fix dripping taps quickly
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
For landlords and businesses
We’re used to working with agents and managing companies. Send the address, photos and access details.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Repair or replace: which is better?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the entire surface with the bath left where it is. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
What you get with us
- Usually one visit, start to finish
- Technicians who travel to you, UK-wide
- Rooms protected and left tidy
- A fixed quote before booking
Read our prices page or guide to resurfacing and replacement costs.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Other services in Exton
Your questions about bath re-enamelling in Exton
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room masked and ventilated.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
What happens once I’ve sent pictures?
You’ll get a fixed quote back, usually with dates to choose from. You are under no obligation.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up and a picture of the whole item with your EX3 postcode.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Can you redo someone else’s repair?
Generally, yes. We remove the old repair before doing a new one, so let us know about it.
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
