Kent · England
Bath Re-enamelling for Eynsford homes
Bath re-enamelling for Eynsford, without a refit. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
The process
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we’re doing. It normally takes the best part of a day, and you can get on with other things while we are there.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
- Plan for the room to be out of bounds to pets and children
Getting a price
Most clients in Eynsford get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Related advice
Bath re-enamelling in Eynsford, done in place
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Our technicians work on acrylic baths, cast iron baths and pressed steel baths, and common reasons people contact us are staining under the taps and around the waste and an outdated colour you’d like to change.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Location
- Eynsford (DA4)
- County
- Kent
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Eynsford
What else we do in Eynsford
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that’s cracked right through
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Eynsford
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Repairing versus replacing in Eynsford
A replacement frequently means several trades over several days. Re-enamelling is one technician, generally one day. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, with no extra for Eynsford. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Honest advice, even when it means no job
- No extra charge for your area
- We come to you, anywhere in the UK
Read our pricing or resurfacing vs replacement cost guide.
What bath re-enamelling costs
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- The material
- The type of damage
- Access to the area
- Doing more than one item at once
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
It only takes a minute to photograph the damage. Please include:
- A wider photo showing the entire bath
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- Natural light rather than flash
Upload pictures of the damage and a wider shot of the whole item, and tell us you are in Eynsford, and we’ll reply with a fixed quote.
Do you need bath re-enamelling in Eynsford?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
You may need us if you’ve spotted:
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
- Staining under the taps and around the waste
- An old resurfacing that’s failing
Before you book anyone
- How changes to the job are handled
- Whether there are any call-out or travel charges
- A fixed quote, and whether VAT is included
- When it can be used again
Where we work around Eynsford
Eynsford is about 5 miles east of Orpington, in Kent. Clients in Eynsford get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Eynsford is one of 922 places in Kent we cover. Our jobs stretch from Eynsford to London (16 miles away).
Our repair technicians cover all of DA4. That includes homes on Station Road, High Street and Edwards Court. If you’re just outside Eynsford, we cover Farningham (1 mile north-east), Maplescombe (1 mile south-east), Horton Kirby (2 miles north-east), East Hill (2 miles south-east) and Speed Gate (2 miles east). Larger places within reach include Maidstone (15 miles south-east), Dartford (5 miles north), Sevenoaks (6 miles south), Gravesend (8 miles north-east), Tonbridge (12 miles south) and Northfleet (7 miles north-east).
Near you in Eynsford
In Eynsford, that means homes near The Anthony Roper Primary School, Church of Saint Martin and The Malt Shovel pub. The closest station to Eynsford is Eynsford station, about 0.5 miles south-west of the centre. Nearby you will also find Eynsford Castle (under half a mile north) and Darenth Park Hospital (5.1 miles north-east). Green spaces nearby include The Warren.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
- Have chips seen to early
- Keep suction mats out of the bath
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
FAQs for Eynsford
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Do you cover Eynsford?
We do. We send a technician to Eynsford for every job, and the price is the same as everywhere else.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
