East Sussex · England
Bath Re-enamelling in Fairwarp
Bath re-enamelling in and around Fairwarp: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Several chips and rust patches
Bath re-enamelling in Fairwarp without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Whether it’s several chips and rust patches and a bath in a colour that no longer suits, we can generally put it right.
All our work is covered by a one-year guarantee.
- Location
- Fairwarp (TN22)
- Area hub
- East Sussex
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we will say what we think before you book.
What we work on
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Nearby places to Fairwarp
Also in Fairwarp
What bath re-enamelling costs
Resurfacing from £350. You’ll know the full cost before booking. We look at:
- The colour and finish to match
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- What kind of damage it is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed price
Almost every job we do is priced from pictures. This is what we need:
- A photo taken from further back
- The material, if you know it
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Do you need bath re-enamelling in Fairwarp?
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Send us a photo if you notice any of these:
- Worn patches where water runs and sits
- A roll-top that is seen better days
- Staining under the taps and around the waste
- An outdated colour you’d like to change
Before you book anyone
- When it can be used again
- Who turns up on the day
- How changes to the job are handled
- If travel is included in the price
Your questions about bath re-enamelling in Fairwarp
Can you repair something that’s been repaired before?
Normally, yes. We remove the old repair before doing a new one.
How long will the bath be out of use?
Most baths are done in a day, ready the following day. We give you timings with the quote.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Do you work in Fairwarp?
Yes, we do. We send a technician to Fairwarp for every job, and the price is the same as everywhere else.
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. Then we’ll agree a date.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and we’ll quote them together.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Where we work around Fairwarp
Fairwarp is about 4 miles south-west of Crowborough, in East Sussex. Across the TN22 area, we carry out the work at your property. Our repair technicians cover 289 places across East Sussex, from the larger towns to small villages. Our jobs stretch from Fairwarp to London (34 miles away).
Here we cover the TN22 postcode area. Local streets include Oldlands Hill, Hop Garden and Back Lane, all of which we cover. Neighbouring places we cover include High Hurstwood (1 mile east), Five Ash Down (1 mile south), Sweethaws (2 miles north-east), Crowborough (4 miles north-east) and Marden's Hill (4 miles north-east). We also work in nearby towns such as Lewes (11 miles south-west), Hailsham (13 miles south-east), Uckfield (4 miles south), Polegate (15 miles south-east), South Malling (11 miles south) and Heathfield (8 miles south-east).
What’s near Fairwarp
In Fairwarp, that means homes near The Foresters Arms and St John the Evangelist Church. Fairwarp’s nearest station is Buxted station, roughly 2.5 miles south-east. A little further out are Tickerage Castle (4.1 miles south-east) and Crowborough War Memorial Hospital (3.2 miles north-east). Open spaces near Fairwarp include Brickfield Meadow.
Landlords, agents and businesses in Fairwarp
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
If you manage property in Fairwarp, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Repair or replace: which is better?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- Dust sheets down, tidy finish
- Honest advice, even when it means no job
- Everything repaired in place
- One-year guarantee on every repair
Read our prices page or resurfacing vs replacement cost guide.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
How it works
Here’s how a visit typically runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Plan for the best part of a day from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
- Open a window if you can
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
Advice
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
