Leicestershire · England
Bath Re-enamelling in Farm Town
Full bath re-enamelling and resurfacing for homes and businesses in Farm Town and across Leicestershire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Wear marks under the taps
- A dull, rough surface that will not come clean
Signs you need bath re-enamelling in Farm Town
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Send us a picture if you notice any of these:
- Staining under the taps and around the waste
- A coating lifting around the plughole
- Several chips and rust patches
- A bath in a colour that no longer suits
What your quote should include
- Is the price fixed, and does it include VAT?
- Whether there are any call-out or travel charges
- What prep work is covered
- What happens if they find more damage
How we handle bath re-enamelling in Farm Town
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s a bath that stays dull however much you clean it and an original cast iron bath that needs restoring, we can generally put it right, whatever the material.
Big or small, you get the same one-year guarantee in Farm Town and across Leicestershire.
- Location
- Farm Town (LE67)
- Area hub
- Leicestershire
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Farm Town
Resurfacing from £350. Prices are worked out job by job, from your pictures. What matters most is:
- The material
- Previous DIY repairs that have to come out
- How many items we do on one visit
- How easy the damage is to reach
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed quote
Before you send pictures, these tips help us give you a firm price:
- Natural light rather than flash
- Any earlier repairs or coatings
- Something in shot to show the size
- A close-up of the damage, in focus
Upload pictures of the damage and a wider shot of the entire item, and tell us you’re in Farm Town, and we will come back with a fixed quote.
Where we work around Farm Town
Farm Town is about 2 miles east of Ashby-de-la-Zouch, in Leicestershire. Customers in Farm Town get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Our repair technicians cover 287 places in Leicestershire. Our nearest city page is Birmingham, about 27 miles away.
Jobs in LE67 are booked in the same way as anywhere else. Nearby, we also work in Coleorton (1 mile north-east), Lount (2 miles north), Newbold (2 miles north), Ravenstone (2 miles south-east) and Ashby-de-la-Zouch (2 miles west). Larger places within reach include Loughborough (9 miles east), Hinckley (14 miles south), Coalville (3 miles south-east), Shepshed (6 miles east), Syston (15 miles east) and Shelthorpe (9 miles east).
Around Farm Town
Our clients here include homes close to Church of St Mary, New Lount and Viscount Beaumont's Church of England Primary School, among other places. Other landmarks nearby include Ashby de la Zouch Museum (2 miles west) and Ashby de la Zouch Castle (1.8 miles west). For a walk, there is Bardon Hill and Charnwood Lodge.
Landlords, agents and businesses in Farm Town
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
The process
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Getting ready for the visit
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
- Mention any parking restrictions or tricky access
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Related advice
FAQs for Farm Town
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Can you repair something that is been repaired before?
Typically, yes. We remove the old repair before doing a new one, so let us know about it.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
How much does bath re-enamelling cost in Farm Town?
Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your LE67 postcode.
Do you cover Farm Town?
Yes. We work across the UK and come to Farm Town. Send photos and we will quote, or call 0345 017 0787.
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Towns and villages near Farm Town
Also in Farm Town
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
- Stick to gentle, non-abrasive cleaners
- Store bottles off the bath
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Should you replace it?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not where you live. The full price is agreed before booking.
Why us?
- No need to remove anything
- Accredited with CHAS, Constructionline and SafeContractor
- A fixed quote before you book
- We leave the room as we found it
See our full price list and bath cost comparison.
When a repair isn’t the answer
A repair is not always the answer, and we’ll tell you before we start. Repairs will not solve:
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
- Acrylic that moves when you stand in it
If in doubt, send photos and we will say what we think.
What we work on
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
