Worcestershire · England
Bath re-enamelling & resurfacing in Fernhill Heath, Worcestershire
Full bath re-enamelling and resurfacing for homes and businesses in Fernhill Heath and across Worcestershire. Free, fixed quotes from your photos.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A dull, rough surface that will not come clean
About our bath re-enamelling in Fernhill Heath
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re frequently asked to fix enamel that’s lost its shine and feels rough and an old resurfacing that’s failing, on acrylic baths, basins & shower trays and Victorian roll-tops.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Fernhill Heath (WR3)
- Region
- Worcestershire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
What bath re-enamelling costs
Prices start from £350. You will not pay by the hour. The price is based on:
- How hard the colour is to match
- The size and number of damaged areas
- Access to the area
- Previous DIY repairs that have to come out
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.
Send pictures for a quote
We price nearly every job from photos. This is what to send:
- Natural light rather than flash
- One picture of the whole bath
- Your postcode, so we can check dates
- Any details about the material
For a price in Fernhill Heath, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
How it works
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take a full day.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Tell us about parking, stairs or access
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
Get a quote
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
What a repair cannot fix
Before you book, it’s worth knowing the limits:
- A metal bath with a through crack
- A bath that’s rusted through
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
More services for Fernhill Heath
Where we work around Fernhill Heath
Fernhill Heath is about 2 miles north of Worcester, in Worcestershire. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Our technicians cover all 376 towns and villages across Worcestershire. You can also see our page for Birmingham, about 21 miles away.
Postcode districts we cover here: WR3. Streets in the area include Station Road, Shrawley Road and Broadfield Crescent, and we cover them all. If you are just outside Fernhill Heath, we cover Hindlip (1 mile south-east), Ladywood (1 mile north-east), Martin Hussingtree (1 mile north-east), Salwarpe (2 miles north) and Warndon (2 miles south-east). Larger places within reach include Redditch (12 miles north-east), Kidderminster (11 miles north), Bromsgrove (9 miles north-east), Great Malvern (9 miles south-west), Droitwich Spa (3 miles north-east) and Evesham (15 miles south-east).
What’s near Fernhill Heath
Typical jobs here are in homes near The Mug House, Tudor Grange Academy Worcester and Hindlip CofE First School. Other local landmarks include RGS The Grange (0.5 miles west) and Church of St Michael and All Angels (0.8 miles north-east). For rail, the closest station is Worcester Shrub Hill station, roughly 2.5 miles south. Nearby you’ll also find Worcestershire Masonic Library and Museum (2.3 miles south) and Holt Castle (3.1 miles north-west).
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Looking after it afterwards
So the finish stays in good condition:
- Leave the bath for the full curing time before using it
- Dry the bath after use to stop limescale
- Don’t leave bottles, razors or sponges standing on the surface
- Rinse off hair dye, oils and bath bombs straight away
Wipe the bath dry after use where you can, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Do you need bath re-enamelling in Fernhill Heath?
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
If you can see any of these, send us a photo:
- A bath that stays dull however much you clean it
- Stains that won’t shift
- An original cast iron bath that needs restoring
- An old resurfacing that is failing
What your quote should include
- Who turns up on the day
- How changes to the job are handled
- What preparation is included
- What protection goes down before work starts
Common questions in Fernhill Heath
How do I get a price for bath re-enamelling in Fernhill Heath?
Prices start from £350. We give a fixed quote from your pictures. Send a close-up and a picture of the entire item with your WR3 postcode.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can pets and children be at home?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Landlords, agents and businesses in Fernhill Heath
We carry out planned and one-off repairs for housing associations and facilities teams in Worcestershire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Landlords, letting agents and housing providers in Fernhill Heath use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
About our accreditations · Every repair comes with a one-year guarantee.
