County Durham · England
Bath re-enamelling & resurfacing in Ferryhill, County Durham
Bath re-enamelling in and around Ferryhill: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
Bath re-enamelling in Ferryhill, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. We’re frequently asked to fix an original cast iron bath that needs restoring and an old resurfacing that’s failing, across basins & shower trays, Victorian roll-tops and cast iron baths.
Big or small, it’s backed by a one-year guarantee in Ferryhill and across County Durham.
- Where
- Ferryhill (DL17)
- Area hub
- County Durham
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
Here’s how a visit usually runs: we arrive on time, protect everything around the work area, do the job and clear up. Allow most of the day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the day after.
Preparing for the visit
- Open a window if you can
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.
Related advice
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- A metal bath with a through crack
- Acrylic that moves when you stand in it
- Holes rusted through the metal
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Ferryhill
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in County Durham and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Common problems we fix in Ferryhill
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
These are the problems we are asked about most:
- Enamel that is lost its shine and feels rough
- Thin, worn enamel in places
- Stains that will not shift
- Several chips and rust patches
Comparing quotes
- A fixed quote, and whether VAT is included
- How soon you can use it again
- How long the guarantee is and what it covers
- Whether the price covers travel
Aftercare tips
To keep it looking its best:
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
- Dry the bath after use to stop limescale
- Respect the curing time we give you
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Towns and villages near Ferryhill
Other services in Ferryhill
Why repair rather than replace?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
- We will tell you if it’s not worth repairing
- Colour mixed on the day to match
Read our prices page or resurfacing vs replacement cost guide.
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Where we work around Ferryhill
Ferryhill is about 2 miles south-east of Spennymoor, in County Durham. Jobs in Ferryhill are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Ferryhill is one of 329 places in County Durham we cover. Our jobs stretch from Ferryhill to Newcastle upon Tyne (about 21 miles away).
Every address in DL17 is within our area, from the main roads to the quietest streets. Whether you live on Church Road, Market Street and Main Street or anywhere nearby, a technician can come to you. Ferryhill is on the A167 and B6287, so it’s easy for us to reach. We also travel to Dean Bank (1 mile west), Ferryhill Station (1 mile south-east), Chilton Lane (1 mile south-east), Great Chilton (1 mile south) and Mainsforth (2 miles east). Within a short drive, we also cover Durham (7 miles north), Newton Aycliffe (4 miles south), Bishop Auckland (6 miles south-west), Seaham (13 miles north-east), Chester-le-Street (12 miles north) and Peterlee (10 miles north-east).
What’s near Ferryhill
Locally, our jobs take us to homes close to The White Horse pub, Broom Cottages Primary & Nursery School and Church of St Luke, among other places. Well-known places in the area include Bishop Auckland Hospital (5.5 miles south-west) and Auckland Castle (5 miles west).
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Your questions about bath re-enamelling in Ferryhill
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
Will the price change on the day?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
How long will the bath be out of use?
One day for most baths, ready the following day. We will confirm timings when we quote.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
About our accreditations · Every repair comes with a one-year guarantee.
