Carmarthenshire · Wales
Bath Re-enamelling for Ferryside homes
Full bath re-enamelling and resurfacing in Ferryside, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Wear marks under the taps
- Enamel that’s lost its shine and feels rough
About our bath re-enamelling in Ferryside
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s wear marks under the taps and an original cast iron bath that needs restoring, we can normally put it right.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Ferryside (SA17)
- Area hub
- Carmarthenshire
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes the best part of a day. At the end we talk you through the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Point us to the nearest place to park
- Keep children and pets away from the room on the day
- Open a window if you can
How to get a price
Most customers in Ferryside get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
How to look after the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Don’t use the bath until it has fully cured
- Don’t leave a chip unrepaired
- Keep suction mats out of the bath
- Fix dripping taps quickly
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
When a repair is not the answer
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
- A bath that’s rusted through
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we work on in Ferryside
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Our work in Ferryside
Ferryside is about 7 miles south of Carmarthen, in Carmarthenshire. Whether you are in the middle of Ferryside or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 195 towns and villages across Carmarthenshire.
Every address in SA17 is covered, from the main roads to the quietest streets. From Briardale, Tri Pen Had Road and Maes-y-Ffynnon or a nearby road, we can come to you. We also cover the places around Ferryside: Llansteffan (1 mile west), Broadway (2 miles south-east), Llansaint (2 miles south-east), Llanybri (2 miles north-west) and Kidwelly (3 miles south-east). Further out, we also cover Llanelli (11 miles south-east), Carmarthen (7 miles north), Llanelli Rural (11 miles south-east), Bigyn (11 miles south-east), Wern (11 miles south-east) and Box (11 miles south-east).
Landmarks near Ferryside
Our customers here include homes close to Bethania Welsh Presbyterian Church and White Lion Hotel, among other places. There’s a railway station in Ferryside itself: Ferryside station. Nearby you will also find Llansteffan Castle (1.2 miles west). Open spaces near Ferryside include Pen Bronyn.
Ferryside questions
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Will there be a smell?
Expect a mild smell while we’re working that clears as it cures.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- The type of damage
- The size and number of damaged areas
- What the surface is made of
- How hard the colour is to match
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Getting a price from photos
When you take your photos, these tips help us give you a firm price:
- A coin or ruler next to the damage for scale
- Details of any past repairs
- A wider photo showing the whole bath
- Good light, ideally daylight, without flash glare
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why choose Surface Doctor in Ferryside
- We’ll tell you if it’s not worth repairing
- Accredited with CHAS, Constructionline and SafeContractor
- Most jobs done in one visit
- Dust sheets down, tidy finish
See our pricing and resurfacing vs replacement cost guide.
Towns and villages near Ferryside
Other services in Ferryside
Signs you need bath re-enamelling in Ferryside
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
These are the problems we are asked about most:
- Wear marks under the taps
- Enamel that is lost its shine and feels rough
- An original cast iron bath that needs restoring
- An old resurfacing that’s failing
What to look for in a quote
- How your room will be protected
- Who will actually do the work
- What happens if they find more damage
- Aftercare advice
About our accreditations · Every repair comes with a one-year guarantee.
