Hampshire · England
Bath Re-enamelling in Filmore Hill
We travel to Filmore Hill for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
About our bath re-enamelling in Filmore Hill
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. We are frequently asked to fix a dull, rough surface that won’t come clean and brown or grey marks that don’t clean off, on basins & shower trays, pressed steel baths and Victorian roll-tops.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Where
- Filmore Hill (GU34)
- Region
- Hampshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
How it works
We agree an arrival time beforehand, so you are not left guessing. On site, it takes most of the day. We leave the room clean.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
- Open a window if you can
Getting a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
Related advice
Common questions in Filmore Hill
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
Does re-enamelling smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
What happens after I send photos?
We review the pictures and send a fixed quote.
Repair or replace in Filmore Hill?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Free fixed quotes from pictures
- Straight answers about what a repair can do
- One-year guarantee on every repair
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list or bath cost comparison.
Our work in Filmore Hill
Filmore Hill is about 6 miles north-west of Petersfield, in Hampshire. From the centre of Filmore Hill to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Filmore Hill is one of 683 towns and villages in Hampshire we cover. Our nearest city page is London, about 52 miles away.
Here we cover the GU34 postcode area. Nearby, we also work in Bailey Green (1 mile east), Privett (1 mile east), West Tisted (1 mile north-west), Monkwood (2 miles north) and West Meon (2 miles south-west). Within a short drive, we also cover Winchester (11 miles west), Havant (13 miles south), Eastleigh (14 miles west), Fareham (14 miles south-west), Horndean (9 miles south) and Chandler's Ford (15 miles west).
Around Filmore Hill
Typical jobs here are in homes near Holy Trinity Church and the streets around them. Further afield, we also cover the area around Petersfield Community Hospital (5.6 miles south-east). For a walk, there is Shutts Copse and Pidham Hill.
Landlord and trade work in Filmore Hill
We carry out planned and one-off repairs for housing associations and facilities teams in Hampshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Store bottles off the bath
- Dry the bath after use to stop limescale
- Don’t let dyes or oils sit on the finish
- Have chips seen to early
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Prices and what affects them
Prices start from £350. You won’t pay by the hour. The price depends on:
- Previous DIY repairs that have to come out
- The type of damage
- The size and number of damaged areas
- Doing more than one item at once
The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Quotes from your photos
Most quotes are done from photos alone. To make it quick:
- One picture of the whole bath
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
For a price in Filmore Hill, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
When a repair is not the answer
It helps to know what we cannot do:
- A bath that’s rusted through
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
Towns and villages near Filmore Hill
More services for Filmore Hill
What we’re called out for in Filmore Hill
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
You may need us if you’ve spotted:
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
- An outdated colour you’d like to change
- Lots of chips and rust spots
What your quote should include
- What protection goes down before work starts
- What the guarantee covers, and for how long
- Whether the price covers travel
- When it can be used again
About our accreditations · Every repair comes with a one-year guarantee.
