West Sussex · England
Bath Re-enamelling in Fisher
Damaged bath in Fisher? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A bath that stays dull however much you clean it
Do you need bath re-enamelling in Fisher?
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
Send us a photo if you notice any of these:
- A bath that stays dull however much you clean it
- A coloured bath you want in white
- A peeling or bubbling previous coating
- Wear marks under the taps
What your quote should include
- What preparation is included
- Whether the price is fixed and includes VAT
- What protection goes down before work starts
- How long the guarantee is and what it covers
Bath re-enamelling at your home in Fisher
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Our technicians work on acrylic baths, cast iron baths and pressed steel baths, and people most often call us about a coloured bath you want in white and thin, worn enamel in places.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Where
- Fisher (PO20)
- County
- West Sussex
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath re-enamelling in Fisher
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Towns and villages near Fisher
Also in Fisher
Landlord and trade work in Fisher
If you manage property in Fisher, we’ll quote for several properties at once. Send pictures for each one and we will come back with a combined price.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
How to look after the repair
After the repair has cured, a few habits help it last:
- Fix dripping taps quickly
- Rinse off hair dye, oils and bath bombs straight away
- A quick wipe after use keeps limescale away
- Keep suction mats out of the bath
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
What affects the price in Fisher
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- Unusual colours or finishes
- Any earlier repairs that need removing first
- What the surface is made of
- How many areas need work
Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
You can take the pictures on your phone, there’s no need for anything special. Just make sure we can see:
- Your postcode, so we can check dates
- Any details about the material
- Natural light rather than flash
- Details of any past repairs
For a price in Fisher, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Where we work around Fisher
Fisher is about 3 miles south of Chichester, in West Sussex. Anywhere in PO20, we come to you. We cover 371 places in West Sussex. You can also see our page for London, about 56 miles away.
Our visits in PO20 work the same way as everywhere else we cover. If you’re just outside Fisher, we cover South Mundham (1 mile east), Street End (1 mile south-west), Sidlesham Common (1 mile west), Sidlesham (2 miles south-west) and Nyetimber (2 miles south-east). We also work in nearby towns such as Bognor Regis (3 miles east), Chichester (3 miles north), Selsey (5 miles south), Littlehampton (10 miles east), Emsworth (9 miles north-west) and Rustington (11 miles east).
Landmarks near Fisher
Around Fisher, we work in homes near Chichester High School For Girls and St Leodegar's Church. The nearest railway station is Chichester station, about 2.5 miles north of the centre. Further afield, we also cover the area around Chichester Cathedral Treasury (2.7 miles north) and Chichester Castle (3 miles north).
When a repair isn’t the answer
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Fisher
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes most of the day, and we finish by cleaning up and talking you through the result.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the next day.
Before we arrive
- Tell us about any previous repairs or coatings
- Ensure the area is dry
- Make sure the room can be ventilated
How to get a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
