West Sussex · England
Bath Re-enamelling in Flansham
Problem with your bath in Flansham? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- A coating lifting around the plughole
How we handle bath re-enamelling in Flansham
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Typical jobs include thin, worn enamel in places and a peeling or bubbling previous coating, on basins & shower trays, acrylic baths and Victorian roll-tops.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Flansham (PO22)
- County
- West Sussex
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Don’t leave a chip unrepaired
- Stick to gentle, non-abrasive cleaners
- A dripping tap should be fixed promptly
- Respect the curing time we give you
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Repairing versus replacing in Flansham
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why Flansham clients choose us
- A year’s guarantee on all work
- We leave the room as we found it
- CHAS, Constructionline and SafeContractor accredited
- Technicians who travel to you, UK-wide
Take a look at our pricing and guide to resurfacing and replacement costs.
Nearby places to Flansham
Other services in Flansham
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Your questions about bath re-enamelling in Flansham
How much does bath re-enamelling cost in Flansham?
Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up and a picture of the entire item with your PO22 postcode.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room masked and ventilated.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Just add the extra items to your pictures and you will get one combined price.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Which areas do you work in?
We work UK-wide, so Flansham is covered. Our prices are the same everywhere.
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Landlords, agents and businesses in Flansham
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Flansham and nearby
Flansham is about 2 miles north-east of Bognor Regis, in West Sussex. Across the PO22 area, we come to you. We work in 371 places across West Sussex, from the larger towns to small villages. Our nearest city page is London, about 54 miles away.
We work across the PO22 postcode area and the streets around it. Other places close to Flansham include Bilsham (1 mile east), Lidsey (2 miles north-west), Shripney (2 miles west), Yapton (2 miles north-east) and Barnham (2 miles north). Further out, we also cover Worthing (11 miles east), Chichester (7 miles west), Selsey (8 miles south-west), Littlehampton (5 miles east), Lancing (14 miles east) and Emsworth (13 miles west).
Near you in Flansham
Around Flansham, we work in homes near The Brooks Local Nature Reserve, Bilsham Chapel and Bishop Tufnell CofE Primary School and the streets around them. Flansham’s nearest station is Barnham station, roughly 1.9 miles north. Well-known places in the area include Tote Copse Castle (3.1 miles north-west) and Bognor Regis Museum (2.3 miles south-west).
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- Any earlier repairs that need removing first
- Access to the area
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
How to get a fixed price
You can typically get a fixed price without us visiting. To make it quick:
- Something in shot to show the size
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- A wider photo showing the entire bath
If you are in Flansham and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
When we would advise against a repair
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- A bath split right through the body
- Leaks from fittings rather than the bath
- Problems we can’t see until an old finish comes off
Send us photos and we’ll tell you honestly before you book.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
The process
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which typically takes most of the day. If we find something your pictures didn’t show, we will explain it before carrying on.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the day after.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
Ask for a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
