Hertfordshire · England
Bath re-enamelling & resurfacing in Flaunden, Hertfordshire
Bath re-enamelling in and around Flaunden: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
About our bath re-enamelling in Flaunden
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. If you’re dealing with a period or roll-top bath worth keeping and chips and rust in more than one place, we can usually put it right, whatever the material.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Flaunden (HP3)
- Region
- Hertfordshire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
Visits start with a quick look at the job together, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. It normally takes the best part of a day.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the next day.
How to prepare
- Tell us about parking, stairs or access
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
Get a quote
If you are in Flaunden and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Related advice
Work for landlords and builders
We’re used to working with agents and managing companies. Just send photos, the address and how to get access.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
How to look after the repair
Aftercare is simple, and it makes a real difference:
- Wipe the bath dry after use in hard water areas
- Wash away dyes and oils after use
- Avoid suction-cup mats
- Get any chip repaired quickly
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Prices and what affects them
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- How many items we do on one visit
- How many areas need work
- What kind of damage it is
- The colour and finish to match
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your photos
You can generally get a fixed quote without us visiting. To make it quick:
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- Any details about the material
- Something in shot to show the size
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
About Flaunden
Flaunden is about 3 miles north-east of Amersham, in Hertfordshire. From the centre of Flaunden to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover 381 places in Hertfordshire. Our jobs stretch from Flaunden to London (about 23 miles away).
Our visits in HP3 work the same way as everywhere else we cover. Close by, we cover Belsize (1 mile east), Chenies (1 mile south), Latimer (2 miles south-west), Little Chalfont (3 miles south-west) and Chorleywood (3 miles south). Within a short drive, we also cover Watford (6 miles south-east), Hemel Hempstead (5 miles north-east), St Albans (9 miles north-east), Harpenden (11 miles north-east), Hatfield (14 miles east) and Borehamwood (11 miles east).
What’s near Flaunden
Our customers here include homes close to St Clement Danes School, The Green Dragon pub and Church of St Mary Magdalene (Church of England), among other places. The nearest railway station is Chalfont & Latimer station, roughly 2.4 miles south-west of the centre. A little further out are Amersham Fair Organ Museum (3.1 miles south-west) and Hemel Hempstead Hospital (4.5 miles north-east). Green spaces nearby include Sarratt Bottom nature reserve.
Repair or replace: which is better?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. Otherwise, resurfacing usually wins. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there’s no premium for Flaunden. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- Technicians who travel to you, UK-wide
- Free fixed quotes from pictures
- Rooms protected and left tidy
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list and guide to resurfacing and replacement costs.
Flaunden questions
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How long does re-enamelling take?
Normally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Do you cover Flaunden?
Yes, we do. Technicians travel to Flaunden from across the region, with no extra charge for travel.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
What we can’t put right
A repair isn’t always the answer, and we will tell you before we start. Repairs will not solve:
- Plumbing leaks, which need a plumber
- A bath split right through the body
- Problems we cannot see until an old finish comes off
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Common problems we fix in Flaunden
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Clients generally contact us about:
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
Before booking anyone
- Whether the price is fixed and includes VAT
- Who turns up on the day
- Aftercare advice
- How the colour is matched
Places near Flaunden
Other services in Flaunden
About our accreditations · Every repair comes with a one-year guarantee.
