Oxfordshire · England
Bath Re-enamelling in Foscot
Bath re-enamelling for Foscot, without a refit. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- An outdated colour you’d like to change
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why us?
- Colour-matched on site
- Repair technicians who travel to you, UK-wide
- CHAS, Constructionline and SafeContractor accredited
- Dust sheets down, tidy finish
Take a look at our full price list or bath cost comparison.
Bath re-enamelling at your home in Foscot
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. We work on cast iron baths, basins & shower trays and acrylic baths, and people most frequently call us about a peeling or bubbling previous coating and brown or grey marks that don’t clean off.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Foscot (OX7)
- Area hub
- Oxfordshire
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
When to call us in Foscot
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Keep an eye out for any of the following:
- Stains that will not shift
- A dull, rough surface that will not come clean
- A roll-top that is seen better days
- Wear marks under the taps
What your quote should include
- What happens if they find more damage
- How the colour is matched
- Whether cleaning and preparation are in the price
- Whether the price is fixed and includes VAT
Common questions in Foscot
What happens if you find more damage?
Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.
Do you cover the entire of Oxfordshire?
Everywhere in the UK, Foscot included. Travel is included in the price.
How do I get a price for bath re-enamelling in Foscot?
Resurfacing from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your OX7 postcode.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
How it works
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. It normally takes most of the day, and you can get on with other things while we are there.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Tell us if there are stairs or a lift
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Keeping it looking good
Simple care helps the repair last. We recommend:
- Respect the curing time we give you
- Have chips seen to early
- Repair dripping taps early
- Dry the bath after use to stop limescale
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
What a repair cannot fix
A repair isn’t right for every job, for example:
- A cast iron or steel bath that’s cracked right through
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Also in Foscot
What affects the price in Foscot
Resurfacing from £350. We price every job individually. What matters most is:
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- What the surface is made of
We charge the same wherever you are, so there is no premium for Foscot. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed price
You can take the pictures on your phone, there’s no need for anything special. Make sure they show:
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- Natural light rather than flash
- One picture of the whole bath
Most clients in Foscot get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Our work in Foscot
Foscot is about 9 miles north of Carterton, in Oxfordshire. Clients in Foscot get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Our technicians cover 443 places across Oxfordshire, from the larger towns to small villages. Our jobs stretch from Foscot to Birmingham (about 41 miles away).
Our visits in OX7 work the same way as everywhere else we cover. That includes homes on Station Road and Old Burford Road and the roads around them. We also cover the places around Foscot: Idbury (2 miles south-west), Fifield (2 miles south), Milton-under-Wychwood (3 miles south), Fulbrook (6 miles south) and Little Barrington (6 miles south-west). Further out, we also cover Witney (10 miles south-east), Carterton (9 miles south), Chipping Norton (5 miles north-east), Woodstock (13 miles east), Cogges (10 miles south-east) and Bloxham (14 miles north-east).
Near you in Foscot
Around Foscot, we work in homes near Bledington Primary School and Church of St Leonard. For rail, the closest station is Kingham station, roughly 0.6 miles north-east of the centre. Nearby you’ll also find Moore Cottage Hospital (5 miles west).
Landlord and trade work in Foscot
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We work for landlords, letting agents and housing providers in Foscot as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
About our accreditations · Every repair comes with a one-year guarantee.
