North Yorkshire · England
Bath re-enamelling & resurfacing in Foxton, North Yorkshire
Bath re-enamelling across Foxton and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Stains that won’t shift
Bath re-enamelling in Foxton without replacing anything
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Common call-outs are for enamel that’s lost its shine and feels rough and a bath in a colour that no longer suits, across cast iron baths, Victorian roll-tops and pressed steel baths.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Foxton (DL6)
- County
- North Yorkshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- Access to the area
- The material and finish
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Send photos for a quote
A couple of clear pictures is all it takes. Try to include:
- Something in shot to show the size
- The postcode, so we can plan the visit
- A picture taken from further back
- The material, if you know it
For a price in Foxton, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Other services in Foxton
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Do not use the bath until it has fully cured
- Wash away dyes and oils after use
- Keep toiletries on a shelf rather than in the bath
- Have chips seen to early
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Honest limits
We will always be straight with you, so here’s what a repair won’t do:
- Leaking taps or wastes (a plumber’s job)
- A bath that’s rusted through
- A cast iron or steel bath that’s cracked right through
If in doubt, send photos and we will say what we think.
Materials we work on in Foxton
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Should you replace it?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.
Why us?
- Generally one visit, start to finish
- One price list for the entire UK
- Every repair guaranteed for a year
- Fixed prices from your pictures
Take a look at our pricing and bath cost comparison.
Common questions in Foxton
Does re-enamelling smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
What areas do you cover?
The whole UK, including all of North Yorkshire. Just include your postcode and we’ll confirm dates.
Can I fix it myself?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which typically takes most of the day. If we find something your pictures didn’t show, we will explain it before carrying on.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the day after.
Before we arrive
- Let us know which floor the room is on
- Let us know if it has been repaired before
- Clear the area around the damage
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Read more
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Signs you need bath re-enamelling in Foxton
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Common reasons people in Foxton contact us include:
- A peeling or bubbling previous coating
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
- Stains that won’t shift
What your quote should include
- What happens if they find more damage
- If travel is included in the price
- Whether cleaning and preparation are in the price
- Aftercare advice
Our work in Foxton
Foxton is about 4 miles east of Northallerton, in North Yorkshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Foxton is one of 626 places in North Yorkshire we cover. Our nearest city page is Leeds, about 39 miles away.
Our technicians cover all of the DL6 postcode area. Other places close to Foxton include Osmotherley (2 miles east), Landmoth (2 miles south), East Harlsey (2 miles north), Over Silton (3 miles south-east) and Brompton (3 miles west). Further out, we also cover Catterick Garrison (14 miles west), Northallerton (4 miles west), Thirsk (9 miles south), Colburn (14 miles west), Stokesley (10 miles north-east) and Sowerby (9 miles south).
Near you in Foxton
Typical jobs here are in homes near Church of St Lawrence. The closest station to Foxton is Northallerton station, about 4.1 miles south-west of the centre. Other landmarks nearby include Sigston Castle (0.7 miles south-west) and Friarage Hospital (3.4 miles west). Open spaces near Foxton include Rough Haw Hill.
About our accreditations · Every repair comes with a one-year guarantee.
