Northamptonshire · England
Bath re-enamelling & resurfacing in Foxton, Northamptonshire
Bath re-enamelling across Foxton and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Wear marks under the taps
Bath re-enamelling in Foxton, done in place
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Our technicians work on pressed steel baths, Victorian roll-tops and acrylic baths, and people most often call us about a coating lifting around the plughole and a coloured bath you want in white.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Location
- Foxton (LE16)
- Area hub
- Northamptonshire
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair cannot fix
We won’t take on work that will not last, so here’s what a repair cannot put right:
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
- Steel that has corroded right through
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
Repair or replace: which is better?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the entire surface with the bath left where it is. Prices start from £350. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
What you get with us
- Same prices wherever you are
- Free fixed quotes from pictures
- Nothing taken out or refitted
- CHAS and Constructionline accredited
Read our prices page and guide to resurfacing and replacement costs.
Common questions in Foxton
How do I get a price for bath re-enamelling in Foxton?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up and a photo of the whole item and your postcode.
What happens next?
We review the photos and send a fixed quote with dates.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
How long is the bath unusable?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Do you work in Foxton?
Yes. We work across the UK and travel to Foxton and the rest of Northamptonshire. Send us photos for a fixed quote, or call 0345 017 0787.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
Common problems we fix in Foxton
Hard water speeds up the wear, and abrasive cleaners do the most damage.
The things customers usually mention when they call include:
- Enamel that is lost its shine and feels rough
- Lots of chips and rust spots
- Staining under the taps and around the waste
- Thin, worn enamel in places
Before you book anyone
- How the colour is matched
- What aftercare is recommended
- How changes to the job are handled
- How the room is protected while they work
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Towns and villages near Foxton
More services for Foxton
Keeping it looking good
So the finish stays in good condition for years:
- Keep toiletries on a shelf rather than in the bath
- Stick to gentle, non-abrasive cleaners
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Our work in Foxton
Foxton is about 3 miles north-west of Market Harborough, in Northamptonshire. Wherever you are in the LE16 postcode area, we carry out the work at your property. Foxton is one of 364 places in Northamptonshire we cover. You can also see our page for Birmingham, about 39 miles away.
Our technicians cover all of LE16 and the streets around it. Local streets include Main Street, Middle Street and Park Close, and we cover them all. If you are just outside Foxton, we cover Gumley (1 mile west), West Langton (2 miles north-east), Kibworth (2 miles north), East Langton (2 miles north-east) and Church Langton (2 miles north-east). We also work in nearby towns such as Corby (11 miles east), Kettering (13 miles south-east), Market Harborough (3 miles south-east), Desborough (7 miles south-east), Rothwell (9 miles south-east) and Little Bowden (3 miles south-east).
Landmarks near Foxton
In Foxton, that means homes near Foxton Primary School, Robert Smyth Academy and The Shoulder of Mutton pub and the streets around them. For rail, the closest station is Market Harborough station, roughly 3 miles south-east. Further afield, we also cover the area around Kibworth Harcourt Castle (3 miles north-west) and Arden (2.8 miles south-east).
Prices and what affects them
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- The type of damage
- How hard the colour is to match
- Previous DIY repairs that have to come out
- The size and number of damaged areas
Our prices are the same across the UK, with no extra for Foxton. The job itself decides the price: the material, the amount of damage and how many items.
Send pictures for a quote
You can take the photos on your phone. Ensure they show:
- The postcode, so we can plan the visit
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which generally takes most of the day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
How to get a price
Email us photos of the damage and a wider shot of the whole item, and tell us you are in Foxton, and we will reply with a fixed price.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
