Calderdale · England
Bath Re-enamelling in Friendly
Bath re-enamelling in and around Friendly: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
Bath re-enamelling in Friendly without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for a coating lifting around the plughole and a dull, rough surface that won’t come clean, on acrylic baths, basins & shower trays and Victorian roll-tops.
You get a one-year guarantee, the same in Friendly as everywhere else we work.
- Where
- Friendly (HX6, HX2)
- Region
- Calderdale
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Friendly
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Most people get in touch after spotting something like this:
- A bath in a colour that no longer suits
- Brown or grey marks that don’t clean off
- A coating lifting around the plughole
- Chips and rust in more than one place
Comparing quotes
- What the guarantee covers, and for how long
- How changes to the job are handled
- How long it needs to cure
- Whether the price is fixed and includes VAT
Where we work around Friendly
Friendly is about 2 miles west of Halifax, in Calderdale. Across the HX6 area, we come to you. Our technicians cover all 129 towns and villages across Calderdale. You can also see our page for Leeds, about 17 miles away.
Jobs in HX6 and HX2 work the same way as everywhere else we cover. Local streets include Timmey Lane, Hollins Lane and Paradise Lane, all of which we cover. We also cover the places around Friendly: Barwood (1 mile west), Warley Town (1 mile north-east), Sowerby Bridge (1 mile south), Sowerby (1 mile south-west) and Luddenden Foot (1 mile north-west). Further out, we also cover Brighouse (6 miles east), Todmorden (7 miles west), Elland (4 miles south-east), Hebden Bridge (4 miles north-west), Akroydon (3 miles north-east) and Siddal (3 miles east).
Around Friendly
In Friendly, that means homes near Trinity Academy Sowerby Bridge, The Copper Cow pub and The Old Congregational Church and the streets around them. For rail, the closest station is Sowerby Bridge station, about 0.7 miles south-east of the centre. Other landmarks nearby include Warley Museum (0.5 miles north-east) and Royal Halifax Infirmary (2.3 miles east). Not far away are Stoodley Pike.
Also near Friendly
Other services in Friendly
Repairing versus replacing in Friendly
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
Why choose Surface Doctor in Friendly
- No need to remove anything
- Same prices wherever you are
- One-year guarantee on every repair
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list or guide to resurfacing and replacement costs.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What happens on the day
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and we start. Allow most of the day, and we will tell you if anything changes.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Plan for the room to be out of bounds to pets and children
- Let us know which floor the room is on
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Related advice
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
When a repair is not the answer
It helps to know what we can’t do too:
- Plumbing leaks, which need a plumber
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
Not sure? Send photos and we will give you a straight answer.
What we work on
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
How to care for the repair
Most damage we see is avoidable. These habits help:
- Don’t leave a chip unrepaired
- Repair dripping taps early
- Don’t leave bottles, razors or sponges standing on the surface
- Wipe the bath dry after use in hard water areas
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Your questions about bath re-enamelling in Friendly
Which areas do you work in?
All of Calderdale, and the rest of the UK. Travel is included in the price.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
How long is the bath unusable?
Normally one day, with the bath ready the following day. A badly pitted bath can need a second day.
Do you cover Friendly?
We do. Repair technicians travel to Friendly from across the region, and the price is the same as everywhere else.
Landlords, agents and businesses in Friendly
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
