Calderdale · England
Bath re-enamelling & resurfacing in Sowerby Bridge, Calderdale
Problem with your bath in Sowerby Bridge? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Thin, worn enamel in places
Bath re-enamelling at your home in Sowerby Bridge
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Our repair technicians work on pressed steel baths, acrylic baths and basins & shower trays, and people most often call us about wear marks under the taps and an original cast iron bath that needs restoring.
Big or small, it’s backed by a one-year guarantee in Sowerby Bridge and across Calderdale.
- Area
- Sowerby Bridge (HX6)
- County
- Calderdale
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath re-enamelling in Sowerby Bridge?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Typical reasons for a call-out include:
- A bath in a colour that no longer suits
- Enamel that’s lost its shine and feels rough
- A roll-top that’s seen better days
- Thin, worn enamel in places
Comparing quotes
- Aftercare advice
- Whether they match the colour on site
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
What we can’t put right
We will always be straight with you, so here’s what a repair can’t fix:
- A metal bath with a through crack
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Sowerby Bridge
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
What we do, step by step
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Make sure the area is dry
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
How to get a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.
Advice
Places near Sowerby Bridge
What else we do in Sowerby Bridge
Your questions about bath re-enamelling in Sowerby Bridge
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If we need another angle, we will ask.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- The material
- How many items we do on one visit
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
You can usually get a fixed quote without us visiting. To help us price it:
- One picture of the whole bath
- The material, if you know it
- Your postcode, so we can check dates
- Any earlier repairs or coatings
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Work for landlords and builders
Landlords, letting agents and housing providers in Sowerby Bridge use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
How to care for the repair
Looking after the surface is easy:
- Don’t let dyes or oils sit on the finish
- A dripping tap should be fixed promptly
- Respect the curing time we give you
- Do not leave bottles, razors or sponges standing on the surface
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
About Sowerby Bridge
Sowerby Bridge is about 2 miles south-west of Halifax, in Calderdale. Customers in Sowerby Bridge get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Sowerby Bridge is one of 129 towns and villages in Calderdale where we work. Our nearest city page is Leeds, about 17 miles away.
Every address in HX6 is covered, from the main roads to the quietest streets. Local streets include Fore Lane, Gordon Street and Haugh End Lane. Sowerby Bridge is on the A58, which makes it straightforward to reach. We also cover the places around Sowerby Bridge: Clough Head (1 mile south-east), Sowerby (1 mile west), Barwood (1 mile north-west), Friendly (1 mile north) and Warley Town (1 mile north). Larger places within reach include Brighouse (6 miles east), Todmorden (7 miles west), Elland (4 miles south-east), Lee Mount (3 miles north-east), Hebden Bridge (5 miles north-west) and Akroydon (3 miles north-east).
Around Sowerby Bridge
In Sowerby Bridge, that means homes near Ryburn Valley High School, Sacred Heart Catholic Voluntary Academy and Church of St George. Sowerby Bridge’s nearest station is Sowerby Bridge station, roughly 0.6 miles east of the centre. Further afield, we also cover the area around Warley Museum (1 mile north) and Royal Halifax Infirmary (2.3 miles east). Green spaces nearby include Stoodley Pike.
About our accreditations · Every repair comes with a one-year guarantee.
