Hampshire · England
Bath re-enamelling & resurfacing in Frogmore, Hampshire
Full bath re-enamelling and resurfacing for homes and businesses in Frogmore and across Hampshire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
Landlord and trade work in Frogmore
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Landlords, letting agents and housing providers in Frogmore use us as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
How we handle bath re-enamelling in Frogmore
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Typical jobs include a coloured bath you want in white and a peeling or bubbling previous coating, on basins & shower trays, cast iron baths and pressed steel baths.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Area
- Frogmore (GU17, GU47, GU46)
- County
- Hampshire
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Frogmore and nearby
Frogmore is about 1 mile south-west of Sandhurst, in Hampshire. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. Our repair technicians cover 683 places in Hampshire, from the larger towns to small villages. You can also see our page for London, about 32 miles away.
All of GU17, GU47 and GU46 is covered. Jobs here include addresses on Bell Lane, Green Lane and Reading Road. We also cover the places around Frogmore: Blackwater (1 mile east), Hawley (1 mile south-east), College Town (1 mile north-east), Sandhurst (1 mile north-east) and York Town (2 miles east). Larger places within reach include Basingstoke (14 miles west), Farnborough (3 miles south-east), Fleet (5 miles south-west), Aldershot (6 miles south), Alton (15 miles south-west) and Tadley (15 miles west).
Landmarks near Frogmore
Locally, our jobs take us to homes close to Frogmore Community College, Frogmore Junior School and Royal Military Academy Library and the streets around them. Other local landmarks include Sandhurst Memorial Park (0.6 miles north), White Swan pub (0.7 miles north) and St Barnabas Church (within half a mile south-east). The closest station to Frogmore is Sandhurst station, roughly 0.8 miles north of the centre. Well-known places in the area include Staff College Museum (2.1 miles east) and Frimley Park Hospital (2.6 miles south-east). For a walk, there is Horseshoe Lake and Wildmoor Heath.
What we do, step by step
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for a full day. Before leaving, we tell you how long to leave it and how to care for it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
- Have a window or extractor fan available
Get a quote
Most customers in Frogmore get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Also near Frogmore
Other services in Frogmore
What we are called out for in Frogmore
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
The most common problems we’re called about are:
- An old resurfacing that’s failing
- Thin, worn enamel in places
- A coloured bath you want in white
- An original cast iron bath that needs restoring
Questions to ask before you book
- Whether the price is fixed and includes VAT
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
- How the colour is matched
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- No need to remove anything
- We leave the room as we found it
- Colours mixed by hand to suit your surface
- Fixed prices from your photos
Read our prices page and guide to resurfacing and replacement costs.
Common questions in Frogmore
Does re-enamelling smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Which areas do you work in?
The entire UK, including all of Hampshire. Send your postcode with your pictures and we will offer you dates.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
How much does bath re-enamelling cost in Frogmore?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up and a picture of the whole item and your postcode.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- A quick wipe after use keeps limescale away
- Do not leave bottles, razors or sponges standing on the surface
- Fix dripping taps quickly
- Avoid suction-cup mats
Dry the bath after use if possible, and rinse away any product left on the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
How we price bath re-enamelling
Prices start from £350. We do not charge extra for travel to Frogmore. The price comes down to:
- The type of damage
- Unusual colours or finishes
- Any earlier repairs that need removing first
- Whether we combine several jobs
We charge the same wherever you are, with no extra for Frogmore. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed price
Most quotes are done from pictures alone. To make it quick:
- A picture taken from further back
- Something in shot to show the size
- The postcode, so we can plan the visit
- What it’s made of, if you know
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
About our accreditations · Every repair comes with a one-year guarantee.
