Kent · England
Bath Re-enamelling for Further Quarter homes
Our repair technicians come to Further Quarter for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Thin, worn enamel in places
About our bath re-enamelling in Further Quarter
Most baths are re-enamelled in a day, and you can use the bath the following day. Nothing is disconnected or removed. If you’re dealing with stains that won’t shift and a period or roll-top bath worth keeping, we can help, on acrylic baths, Victorian roll-tops and pressed steel baths alike.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Further Quarter (TN26)
- County
- Kent
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Don’t use the bath until it has fully cured
- Store bottles off the bath
- Don’t let dyes or oils sit on the finish
- Keep suction mats out of the bath
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
The process
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a full day. We tidy up before we leave and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Move bottles, mats and clutter away from the area
- Let us know which floor the room is on
- Ensure the room can be ventilated
Get a quote
To get a price, send two or three photos through our quote form or ring us. We will tell you honestly whether it can be repaired.
Advice
Work for landlords and builders
Landlords, letting agents and housing providers in Further Quarter use us as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Further Quarter: your questions answered
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
How long is the bath unusable?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Do you cover Further Quarter?
Yes, we do. Repair technicians travel to Further Quarter from across the region, with no extra charge for travel.
Can you do the outside of a roll-top?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
What affects the price in Further Quarter
Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:
- The colour and finish to match
- The size and number of damaged areas
- Where the damage is and how we get to it
- What kind of damage it is
Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Getting a price from pictures
You can usually get a fixed price without us visiting. To help us price it:
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- Any details about the material
- A wider photo showing the whole bath
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you are under no obligation.
Further Quarter and the surrounding area
Further Quarter is about 7 miles west of Ashford, in Kent. Jobs in Further Quarter are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We work in all 922 towns and villages in Kent, from the larger towns to small villages. Our jobs stretch from Further Quarter to London (about 43 miles away).
Here we cover the TN26 postcode area. Neighbouring places we cover include High Halden (1 mile south), Wissenden (2 miles north-east), Bethersden (2 miles east), Maltman's Hill (2 miles north) and Chambers' Green (3 miles north-east). Further out, we also cover Maidstone (13 miles north-west), Ashford (7 miles east), Sittingbourne (15 miles north), Foley Park (14 miles north-west), Preston (15 miles north-east) and Paddock Wood (14 miles west).
Local landmarks in Further Quarter
The closest station to Further Quarter is Pluckley station, roughly 3 miles north-east. Further afield, we also cover the area around Romden Castle (1.9 miles north) and Benenden Hospital (4.5 miles south-west).
What we are called out for in Further Quarter
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is normally as strong as ever.
Typical reasons for a call-out include:
- Brown or grey marks that do not clean off
- A period or roll-top bath worth keeping
- Enamel that is lost its shine and feels rough
- An old resurfacing that is failing
Before booking anyone
- Whether the price covers travel
- Is the price fixed, and does it include VAT?
- How long it needs to cure
- Aftercare advice
Places near Further Quarter
What else we do in Further Quarter
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
- A cast iron or steel bath that’s cracked right through
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
