Sandwell · England
Bath Re-enamelling for Galton Village homes
Bath re-enamelling in and around Galton Village: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- Staining under the taps and around the waste
Bath re-enamelling in Galton Village without replacing anything
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We are frequently asked to fix a coating lifting around the plughole and an original cast iron bath that needs restoring, in cast iron baths, pressed steel baths and acrylic baths.
Big or small, you get the same one-year guarantee in Galton Village and across Sandwell.
- Location
- Galton Village (DY4, B70)
- Region
- Sandwell
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Galton Village
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Do you cover the whole of Sandwell?
Across the UK. Prices don’t change with location.
How much does bath re-enamelling cost in Galton Village?
Resurfacing from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
Will there be fumes?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Galton Village and the surrounding area
Galton Village is about 1 mile east of Tipton, in Sandwell. Book a date that suits you, and you will know when to expect us, so you are not left waiting in all day. We cover all 33 towns and villages across Sandwell, from the larger towns to small villages. Our nearest city page is Birmingham, about 8 miles away.
Postcode districts we cover here: DY4 and B70. From New Road, Farm Road and Hope Road or a nearby road, a technician can come to you. Galton Village is on the A461, so it’s easy for us to reach. We also cover the places around Galton Village: Toll End (1 mile north), Great Bridge (1 mile south-east), Horseley Heath (1 mile south), Tipton (1 mile west) and Ocker Hill (1 mile north). Larger places within reach include Oldbury (3 miles south-east), Smethwick (4 miles south-east), Rowley Regis (3 miles south), Reddal Hill (4 miles south), Cradley Heath (5 miles south) and Old Hill (4 miles south).
Landmarks near Galton Village
Around Galton Village, we work in homes near The ACE Academy, Church of St Martin and Great Bridge Primary School, among other places. For rail, the closest station is Dudley Port station, roughly 0.7 miles south-west. A little further out are New Square (2.2 miles south-east) and Dudley Guest Hospital (1.6 miles south-west). Green spaces nearby include Forge Mill Lake and Mons Hill.
What we’re called out for in Galton Village
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
If you can see any of these, send us a photo:
- An outdated colour you’d like to change
- Brown or grey marks that don’t clean off
- An original cast iron bath that needs restoring
- A dull, rough surface that won’t come clean
What your quote should include
- How the room is protected while they work
- Who will actually do the work
- How to look after the finish
- Whether they match the colour on site
What affects the price in Galton Village
Resurfacing from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- The size and number of damaged areas
- The material and finish
- The type of damage
- How many items we do on one visit
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Quotes from your pictures
Most quotes are done from pictures alone. To make it quick:
- A coin beside the damage so we can judge size
- One picture of the whole bath
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
What happens on the day
Arrival times are agreed in advance, so you are not left guessing. Once we’re there, the work takes most of the day in most cases. We leave the room clean and you will know when it can be used.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the next day.
How to prepare
- Open a window if you can
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Related advice
Places near Galton Village
Also in Galton Village
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
When a repair is not the answer
A repair isn’t always the answer, and we’d rather say so up front. Repairs won’t solve:
- Steel that has corroded right through
- Leaks from fittings rather than the bath
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Landlord and trade work in Galton Village
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
Repairing versus replacing in Galton Village
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and normally one day, and the bath can be used the day after. Prices start from £350. We charge the same wherever you are, so there is no premium for Galton Village. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
- Colour-matched on site
- Rooms protected and left tidy
Read our full price list or resurfacing vs replacement cost guide.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
